Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual page 413

Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page 90.
Ê If applicable, close the rack door as described in section
door" on page
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
on page 117.
Ê After replacing the front LAN board in a server running Linux OS, update its
MAC address in the related NIC definition file as described in section
"Updating the NIC configuration file in a Linux environment" on page
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN controllers" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
TX140 S1
92.
"Looking up changed MAC / WWN addresses"
Upgrade and Maintenance Manual
Front panel and external connectors
87.
"Connecting the server to the mains" on
116.
89.
"Closing the rack
114.
120.
"Enabling
413