Concluding Steps - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

7.4.1.5

Concluding steps

Perform the following procedures to complete the task:
Ê Close the side / top cover as described in section
on page 80 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reinstall all HDD / SSD modules to their original drive bays as described in
section "Installing 2.5-inch HDD / SSD modules" on page
Ê When working on a tower server, close the HDD bay cover as described in
section "Installing the HDD bay cover" on page
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page 90.
Ê If applicable, close the rack door as described in section
door" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
TX140 S1
"Mounting the side cover" on page 85
92.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
87.
84.
"Connecting the server to the mains" on
116.
"Mounting the top cover"
(tower
89.
163.
"Closing the rack
"Enabling
193