Preparing The Slide-In Unit - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Accessible drives
Figure 192: Mounting the slimline ODD in the slide-in unit (B)
Ê Fasten it with two M2 x 2.5 mm screws to the slide-in unit on the left side..

12.2.5.2 Preparing the slide-in unit

Removing EasyClick rails from the dummy cover
I
Slide-in units are supplied without EasyClick rails. Before installing a new
slide-in unit, EasyClick rails need to be removed from the dummy cover
and mounted on the slide-in unit.
338 Upgrade and Maintenance Manual
TX140 S1