Configuring Boot Watchdog Settings - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

5.1.2.2

Configuring boot watchdog settings

If the system is to be started from removable boot media for firmware upgrade
purposes, the Boot watchdog needs to be disabled before starting maintenance
task. Otherwise, the Boot watchdog might initiate a system reboot before the
flash process is complete.
V
CAUTION!
An incomplete firmware upgrade process may render the server
inaccessible or result in damaged / destroyed hardware.
Timer settings can be configured in the BIOS or using the ServerView iRMC
web frontend:
Configuring boot watchdog settings in the BIOS
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under Boot Watchdog set the Action setting to Continue.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the "D3049 BIOS Setup Utility for PRIMERGY TX140 S1 / TX120
S3 Reference Manual".
Configuring boot watchdog settings using the iRMC web frontend
Ê Enter the ServerView iRMC web frontend.
Ê Select the Server Management menu.
Ê Under Watchdog Settings select Continue from the Boot Watchdog drop down
list.
Ê Click Apply for the changes to take effect.
I
For detailed information on iRMC settings, refer to the "Integrated
Remote Management Controller" user guides available online at
http://manuals.ts.fujitsu.com (http://jp.fujitsu.com/platform/server/primergy/
for the Japanese market) or from the ServerView Suite DVD 2
manual/
supplied with your PRIMERGY server.
TX140 S1
Upgrade and Maintenance Manual
Basic software procedures
95