Installing The Psu Dummy Cover - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

6.2.8

Installing the PSU dummy cover

Figure 55: Installing a PSU dummy cover
Ê Insert the PSU dummy cover into the empty PSU slot with the impressed
arrow symbol facing to the left (see circle).
Ê Push the PSU dummy module into its slot until it locks in place.
V
CAUTION!
Always install dummy modules into unused PSU slots to comply with
applicable EMC regulations and satisfy cooling requirements.
TX140 S1
Upgrade and Maintenance Manual
Power supply
143