Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual page 582

Appendix
Indicator
LAN
1
link/transfer
2 LAN speed
Global error
indicator
3
CSS indicator
ID indicator
I
Note on the onboard LAN controller
The system board is equipped with a Gigabit Ethernet Controller that
supports transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s.
The separate management LAN connector is used as a management
interface (iRMC S3) and is prepared for operation with the Remote
Management. Optionally LAN connector 1 can also be used for iRMC S3
server management.
582
Status Description
green on LAN connection established
off no LAN connection
green
data transfer in progress
flashing
yellow on traffic a transfer rate of 1 Gbit/s
green on traffic a transfer rate of 100 Mbit/s
off traffic a transfer rate of 10 Mbit/s
off no critical event (non CSS component)
prefailure detected (non CSS
orange on
component)
orange
non CSS component failure
flashing
off no critical event (CSS component)
yellow on prefailure detected (CSS component)
yellow
CSS component failure
flashing
server has been highlighted using
ServerView Operations Manager or the
blue on
ID button on the front panel for easy
identification
Upgrade and Maintenance Manual
TX140 S1