Concluding Steps - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

System board and components

14.3.1.4 Concluding steps

Perform the following procedures to complete the task:
Ê Close the side / top cover as described in section
on page 80 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page 90.
Ê If applicable, close the rack door as described in section
door" on page
Ê Enable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "D3049 BIOS Setup Utility for PRIMERGY
TX140 S1 / TX120 S3 Reference Manual", available from the
ServerView Suite DVD 2 supplied with your PRIMERGY server or
online at
http://jp.fujitsu.com/platform/server/primergy/manual/
market).
442
"Mounting the side cover" on page 85
92.
http://manuals.ts.fujitsu.com
Upgrade and Maintenance Manual
"Mounting the top cover"
87.
"Connecting the server to the mains" on
(EMEA market) or
(tower
89.
"Closing the rack
(Japanese
TX140 S1