Removing An Expansion Card - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Expansion cards and backup units
Ê Remove the fan module as described in section
on page 208.
9.2.2.3

Removing an expansion card

Figure 113: Removing an expansion card (A)
Ê If applicable, remove SFP+ transceiver modules from the expansion card,
as described in section
Ê Fold up the locking handle on the slot bracket clamp (1).
Ê Remove the slot bracket clamp (2).
234
"Replacing SFP+ transceiver modules" on page
Upgrade and Maintenance Manual
"Removing the fan module"
291.
TX140 S1