Concluding Steps - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Converting a tower server to a rack server
15.8

Concluding steps

Perform the following procedures to complete the task:
Ê Close the top cover as described in section
page 80.
Ê Mount the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I
The document is available from the ServerView Suite DVD 2 supplied
with your PRIMERGY server or online at
(EMEA market) or
(Japanese market). The printed poster is contained in the rack
mounting kit.
Ê Mount the server in the rack as described in section
the rack" on page
Ê Reconnect all external cables.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page 90.
Ê Close the rack door as described in section
page 92.
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
Ê Change the chassis model setting to "rack server" as described in section
"Specifying the chassis model" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
488
http://jp.fujitsu.com/platform/server/primergy/manual/
87.
"Connecting the server to the mains" on
119.
116.
Upgrade and Maintenance Manual
"Mounting the top cover" on
http://manuals.ts.fujitsu.com
"Mounting the server in
"Closing the rack door" on
"Using the Chassis ID
121".
"Enabling
TX140 S1