Opening The Server; Rack Model; Removing The Top Cover - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

4.5

Opening the server

V
CAUTION!
Before removing or installing covers, turn off the server and all
●
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX140 S1 server must not run while the side cover is
removed.
For further safety information, please refer to chapter
●
information" on page
4.5.1

Rack model

4.5.1.1

Removing the top cover

Figure 12: Removing the top cover (rack server)
TX140 S1
41.
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
67