If A Paper Mismatch Occurs; Canceling A Print Job - Ricoh 132 MF User Manual

3. Printing Documents

If a Paper Mismatch Occurs

The machine reports an error if:
• The paper size does not match the print job's machine settings when the following machine's setting
item is enabled.
• [Size Mismatch Detctn] under [Paper Settings]
• The paper type does not match the print job's settings when [Input Tray:] is set to [Auto Tray Select]
on the printer driver.
There are two ways to resolve these errors:
Continue printing using mismatched paper
Ignore the error and print using mismatched paper.
Cancel the print job
Cancel printing.
• For details about "size mismatch detection", see page 236 "Paper Settings".
• If [Auto Continue] under [System Settings] is enabled, the machine ignores the paper type and size
settings and prints on whatever paper is loaded. Printing stops temporarily when the error is
detected, and restarts automatically after about ten seconds using the settings made on the control
panel. For details about [Auto Continue], see page 227 "System Settings".
Continuing printing using mismatched paper
If the paper is too small for the print job, the printed image will be cropped.
1. While the error message is displayed, press [Form Feed].

Canceling a Print Job

You can cancel print jobs using either the machine's control panel or your computer, depending on the
status of the job.
Canceling a print job before printing has started
Windows
1. Double-click the printer icon on the task tray of your computer.
2. Select the print job you want to cancel, click the [Document] menu, and then click
[Cancel].
88