Summary Of Output Command Parameters (Continuation) - Oce XDL Reference Manual

Summary of OUTPUT Command Parameters (Continuation)

3.9 Summary of OUTPUT Command Parameters (Continuation)
Parameter
FORMS=
(form-id[, init
[, copies]]
[, (INKS, inkref
[, inkref]
[, ...])])
FORMS=
NONE
GRAPHICS=
90
Definition(s)
This option consists of:
form-id
Specifies a 1 to 6 character file name (may be numer-
ic, alpha, or alphanumeric) which exists on disk.
init
Specifies the beginning ply (pass) number to which a
specified form applies. This defaults to the first or
next copy. If the copies parameter is not specified,
the last (or only) specified form applies to all copies
beginning with copy number init. If the form is not the
last one specified, copies defaults to 1. If neither init
nor copies is specified, the form applies to all copies
of the report.
copies
The number of copies of the report to be printed.
inkref
Identifies the inks that override the corresponding
inks specified in the ink list of the form. If the form
does not contain an ink list, the form is printed in
black. If one inkref in the ink list is omitted, commas
must be used to maintain the relative positioning of
the remaining ink references. If more inkrefs are
specified than contained in the ink list of the form, the
extra inkrefs are ignored.
Inkrefs may be entered as ink names or as numeric
ink indices using an inklist specified by an IDR ILIST
parameter which is referenced by an IDR parameter
in the same OUTPUT command.
Only references to primary colours are allowed.
NONE
Means that no form is added to the associated report
page of variable data.
The default is NONE.
The options to this command are unsupported. The
command is gracefully processed by the compile
function. Options are ignored and a warning mes-
sage is issued. OUTPUT GRAPHICS=YES is always
assumed.
Print Processing
Offline Online DJDE
Y Y
Y Y
A29247-X4-X-8-7672
Y
N