Summary Of Route Command Parameters - Oce XDL Reference Manual

Print Processing

3.11 Summary of ROUTE Command Parameters

The ROUTE command allows the user to print identifying information (text and an optional
form) on the page preceding a report. The ROUTE command may be coded within a JDL
or in a disk file of ROUTE commands.
RFORM
RTEXT
Parameter
RFORM=
form-id
RFORM=
NONE
A29247-X4-X-8-7672
This parameter specifies a form to be printed with all RTEXT pages. If
RTEXT data is not specified, RFORM is not honored. However, RTEXT
can be specified as one blank character (or space) to print an RFORM on
the routing page without any accompanying text.
This parameter specifies text to be printed on a separate page preceding
a report (or copy ply).
Definition(s)
form-id
This is the name of a file cataloged in the FRM di-
rectory which is to be printed on routing pages. It is
created by compiling a file of forms source com-
mands, called a JSL, with the FDL compiler.
The RFORM parameter is not allowed in a ROUTE
command which is being defined as a cataloged file
but is specified in the ROUTE command in the JSL
invoking the cataloged RTEXT file.
NONE
Specifies that no form is to be printed.
The default is NONE.
Summary of ROUTE Command Parameters
Offline
Y
Online DJDE
Y Y
125