Summary Of Record Command Parameters - Oce XDL Reference Manual

Input Processing

2.5 Summary of RECORD Command Parameters

ADJUST
FORMAT
LENGTH
LMULT
LTHFLD
OFFSET
POSTAMBLE This parameter specifies the length of any extraneous data at the end of
PREAMBLE
STRUCTURE This parameter specifies the general record structure of the input data.
Parameter
ADJUST=
value
FORMAT=
type
A29247-X4-X-8-7672
This parameter specifies an adjustment value added to or subtracted from
the contents of the record length field to determine the true record length.
This parameter specifies the format of the record length field.
This parameter specifies the length of the longest logical record. A value
specifies the length, in bytes, of the longest logical record.
This parameter specifies a multiplication factor applied to the contents of
the record length field to determine the true record length.
This parameter specifies the length of the field containing the record
length.
This parameter specifies the location of the record length field.
the record.
This parameter specifies the offset to the user portion of the record, that
is, the record preamble length.
Definition(s)
value
Specifies the record adjustment length. It is a con-
stant integer added to or subtracted from the value
in the length field of every record. The range of a
value is -127 to 127 and must be no greater than
length. The first character may be plus (+) or minus
(-).
The default is 0.
type
Available type parameters are:
BIN (binary)
DEC (decimal) (=printable)
The default is BIN.
Summary of RECORD Command Parameters
Offline Online DJDE
Y N N
Y N N
41