Summary Of Lmodify Command Parameters - Oce XDL Reference Manual

Summary of LMODIFY command parameters

4.7 Summary of LMODIFY command parameters
This command is completely gracefully ignored by the LCDS-Module.
TEST
INKINDEX
SELECT
Parameter
TEST=test-exp
[, INK=ink-in-
dex]
[, SELECT=
select-op]
[TEST=test-
exp
[, INK=ink-in-
dex]
[, SELECT=
select-op]]
[, ...]
152
This parameter specifies the expression which is to be evaluated for de-
ciding if highlight colour will be applied to the current print line.
This parameter specifies the index of the desired ink out of inklist to be
used.
This parameter specifies the portion of the printline to be printed with high-
light colour.
Definition(s)
test-exp
The format and syntax of a test-exp are defined in the
"Test expression definition " section. The whole line
or a part of it is printed with highlight colour if the test-
exp is satisfied.
ink-index
Specifies the ink to be used to print the text data. The
ink-index refers to the current inklist (IDR ILIST)
specified by the OUTPUT IDR parameter.
Only references to primary colours are allowed.
select-opt
Specifies whether the whole print line or a part of it to
be printed in highlight colour. The select-opt format is
one of the following:
select-opt=LINE
The whole line is printed in highlight colour
select-opt=(offset, length)
Specifies an offset in bytes (relative to zero) from the
beginning of the print line for length characters to be
printed using the selected ink.
The default for select-opt is LINE
Using Logical Processing
Offline Online DJDE
Y Y
A29247-X4-X-8-7672
N