Summary Of Tcode Command Parameters - Oce XDL Reference Manual

Input Processing

2.6 Summary of TCODE Command Parameters

The TCODE command defines a set of input-character-to-type assignments to be used for
the masked string comparisons in a report. It must be used whenever it is not possible to
use one of the standard sets of default type assignments without modification.
DEFAULT
Parameter
DEFAULT=
tcode-type
A29247-X4-X-8-7672
This parameter specifies an initial set of character type assignments for
use with masked comparisons. Default assignments for any standard
character set may be specified by coding the appropriate keyword.
The full set of assignments for any nonstandard (user-defined) character
set may be specified by coding a value with an integer number ranging in
value from 0 through 7. If a 0 is specified, all the characters are untyped;
if a 1 is specified, all the characters are type 1; if a 7 is specified, all the
characters are type 7. The initial set of type assignments may be modified
by specifying the TASSIGN and TRESET parameters.
Definition(s)
tcode-type
Available tcode-type keyword parameters are:
ASCII
EBCDIC
value
Initial typecodes are set to allow the following: all
numeric characters (0-9) are type 1 characters,
and all uppercase and lowercase alphabetic char-
acters (A-Z, a-z) are type 2 characters. All other
characters, if any, are untyped characters.
There is no default.
Summary of TCODE Command Parameters
Offline
Y
Online DJDE
Y N
45