Effect Of Multiple Logical; Copies=Processing - Oce XDL Reference Manual

Dynamic Job Descriptor Entries (DJDEs)
5.9 Effect of Multiple Logical Pages
If multiple BEGINs are being used to define multiple logical pages on one physical page the
following points should be considered:
With the exception of DEPT and SHIFT, all page-oriented DJDEs are applied at a logical
page boundary.
• The following DJDEs, when applied, cause the current page position to be set to the
first logical page of the front side of a new physical sheet:
– DUPLEX
– COPIES
– JDL
– JDE
– BFORM
– OTEXT
– RTEXT
– FEED
• The following DJDEs, when applied, cause the current page position to be set to the
first logical page of the next physical side:
– FORMS
– FORMAT
– BEGIN
– PMODE
– FONTS

5.9.1 COPIES=processing

If the system is approaching disk saturation, the output task may have already released disk
space for a report that increases its copy count from an initial count of one to a higher num-
ber. To avoid this, do one of the following:
• Set the number of copies of the first page to 2 or higher.
• Include a copy-sensitive CME.
• Use the COPIES parameter in the START command.
A29247-X4-X-8-7672
Effect of Multiple Logical Pages
201