Copying operations
3
Copying operations
3.1
Using Finisher FS-520
The Finisher FS-520 has a primary (main) tray and a secondary (sub) tray,
each of which has the following output modes.
Output to the primary (main) tray
Mode
Non-sort
Collate
Uncollate
Staple
Combined with the output modes above except staple mode, you can also
choose to output face up or face down, and output front to back or back to
front.
Example: Make 3 copied sets from 4 original sheets
Non-sort
FS-520
Description
Non-sort mode simply means that the offset-stacker finisher modes are not se-
lected. Copies will be stacked upon exit without being offset by sorted sets.
Collate mode outputs multiple copies of the original set, having each sorted set
offset by 30 mm upon exit
Uncollate mode groups together multiple copies of each original and offsets the
sets by 30 mm upon exit.
Staple mode offsets and staples each sorted set.
Staple
2 staples
1 oblique
staple
Collated
Offset by 30mm
3
Uncollated
Offset by 30mm
3-3