Summary Of Abnormal Command Parameters - Oce XDL Reference Manual

Summary of ABNORMAL Command Parameters

3.2 Summary of ABNORMAL Command Parameters
The ABNORMAL command allows you to restrict certain operator functions and define sys-
tem responses to error conditions.
ERROR
IMISMATCH
ISUBSTITUTE
OTEXT
Parameter
ERROR=
CONTINUE
ERROR=
ABORT
ERROR=
STOP
60
This parameter specifies the required system response to abnormal
conditions detected in input processing or compiling DJDEs.
This parameter specifies the action to take when a specified ink requires
a primary colour that is not currently loaded. The default is STOP.
This parameter specifies whether the operator is allowed to do an ink
substitution or not. The default is ANY.
This parameter specifies that the system is to stop and display a WAIT
message when the recovery marker page is printed. This delay allows
the operator to verify the output report in the near vicinity of the marker
page. The default is NOWAIT, which means that the message is still dis-
played upon printing of the marker page, but printing does not stop.
Definition(s)
CONTINUE
Displays the normal system message defining
the abnormal condition and continues process-
ing the report without applying the offending
DJDE parameter and without offering the opera-
tor the choice of continuing or aborting the job.
ABORT
Displays the message for the abnormal condition
and aborts only the report it is processing (not
the entire job) without offering the operator the
choice of continuing or aborting the job.
STOP
The default for this parameter and indicates that
the system stop processing the report and wait
for the operator to respond with a CONTINUE or
ABORT command.
The default is STOP.
Print Processing
Offline Online DJDE
Y Y
A29247-X4-X-8-7672
N