Summary Of Volume Command Parameters - Oce XDL Reference Manual

Summary of VOLUME Command Parameters

2.7 Summary of VOLUME Command Parameters
BMULT
CODE
EOV
HOST
INTERPRESS
LABEL
LCODE
LPACK
MAXLAB
MINLAB
PLABEL
RMULT
TCODE
UNPACK
46
This parameter specifies a multiplication factor you can use to determine
true block length.
This parameter specifies which code translation table the system uses
to interpret the input data.
This parameter specifies the action the system takes when it encounters
an end-of-volume (EOV) on the input data tape.
This parameter specifies the computer or host operating system gener-
ated the input data file.
This parameter provides additional control over the interpress environ-
ment.
This parameter specifies the type of label on the input tape.
This parameter specifies the code translation table to use when inter-
preting the tape label.
This parameter specifies whether undefined labels (LABEL=UNDEF)
are packed or unpacked.
This parameter specifies the longest physical block treat as a label for a
undefined labels (LABEL=UNDEF).
This parameter specifies the smallest physical block to treat as a label
for undefined labels (LABEL=UNDEF).
Specifies whether the tape labels are to be printed.
This parameter specifies a multiplication factor the record length uses to
determine the true record length.
This parameter specifies the set of type assignments to use for masked
comparisons.
This parameter specifies the unpacking method of the input data when
required.
Input Processing
A29247-X4-X-8-7672