Job Parameter Modification Restrictions - Oce XDL Reference Manual

Job Parameter Modification Restrictions

5.7 Job Parameter Modification Restrictions
To process a DJDE, the system has already been required to process data up to the rec-
ognition and interpretation of the DJDE itself. This requires that the basic description of the
input source must have been correct prior to the application of the DJDE. Thus, the descrip-
tion of the input source cannot be changed through DJDE, either by accident or by intent.
The system does not allow these basic parameters to be changed through the DJDE pa-
rameter JDE. The JDE specified by JDE=DJDE is referred to as a selected JDE.
Command
VOLUME
OUTPUT
IDEN
BLOCK
RECORD
BANNER
Changing the online BANNER offset criteria or VOLUME command OPTIMIZE parameter
in a selected JDE causes unpredictable results and should not be attempted.
The selected JDE should specify all JDE parameters which stay the same as the original
JDE as well as the changes.
Command
LINE
ABNORMAL
ACCT
EXPORT
IDR
MESSAGE
OUTPUT
PDE
ROUTE
198
Parameter(s)
HOST
LABEL
UNPACK
OFFSET
All parameters
All parameters
All parameters
All parameters
Parameter(s)
DATA
FONTINDEX
INKINDEX
MARGIN
OVERPRINT
PCCTYPE
VFU
SECURITY, ERROR
All parameters
All parameters
All parameters
All parameters
All parameters except OFFSET
All parameters
All parameters
Dynamic Job Descriptor Entries (DJDEs)
A29247-X4-X-8-7672