Summary Of Stockset Statement Command Parameters - Oce XDL Reference Manual

Print Processing

3.13 Summary of STOCKSET Statement Command Parameters

The STOCKSET statement defines a set of stocks used in a report. Stock reference are
used in the DJDE of the Print Data to specify a stock. With the SCT (Stock Configuration
tool, see User's Guide), the user can associate stocknames to the stocks of the printer.
Therefore this JSL command associates the application level (stock-reference) with the ac-
tual printer.
Stocksets are the means of associating stock references with stock names.
An identifier is specified to the STOCKSET statement for future reference by the STOCK
command of an OUTPUT statement.
ASSIGN
INIFEED
SYSPAGE
Parameter
ASSIGN=
stock-descrip-
tor | (,stock-de-
scriptor
[,stock-
descriptor
[,...]])
INIFEED=
stock-name |
stock-refer-
ence
A29247-X4-X-8-7672
Summary of STOCKSET Statement Command Parameters
Lists stock names and association of stock references with stock names.
This parameter specifies which stock to use in the absence of any options
of the FEED command.
This parameter specifies which stock to use for system-generated mes-
sages.
Definition(s)
Associates stocks with the identified stockset.
A stock-descriptor is one of the following:
stock-name:= {<name> | MAIN | OPR | AUX}
MAIN and AUX are defined with the SCT or the
PJM/LCDS GUI.
OPR is always MAN.
No other values are allowed.
<name> may have up to 6 characters
stock-name (,stock-reference [(,stock-reference
[(,...)])])
stock-reference is a cross-reference name that
means logical paper name.
There is no default.
Specifies which stock to use in the absence of any
FEED command. If not specified, the INIFEED com-
mand defaults to the first stock name specified in the
ASSIGN command.
Default is the first stock-name.
Offline Online DJDE
Y Y N
Y Y N
131