Summary Of Acct Command Parameters - Oce XDL Reference Manual

Print Processing

3.3 Summary of ACCT command parameters

The ACCT command allows the user to print an account page or to omit the printout of an
account page at the end of each report. Using this command, different entries in the general
PRISMA accounting reports can be updated. For more information on PRISMA accounting
reports refer to the Administrator's Guide, chapter "Accounting".
The parameters of the ACCT statement are:
DEPT
USER
Parameter
DEPT=sc
USER=
BIN|TRAY|
BOTH|NONE
A29247-X4-X-8-7672
Accumulation of user accounting statistics.
Output destination of accounting pages within a report.
Definition(s)
sc
is a string constant of up to 31 characters repre-
senting a department code or name under which
accounting information will be maintained.
sc is stored in account record type 1200 (see Ad-
ministrator's Guide)
Specifies destination of the one page accounting
summary for each report.
BIN
Directs the accounting page to the output tray.
TRAY
same as BIN.
BOTH
same as BIN.
NONE
works for Start-JSL only. It cannot be changed
via DJDE JDL=switch.
This restriction is due to the fact, that LCDS ac-
count data are printed on the SPS trailer page.
Thus the USER parameter switches SPS header
& Trailer pages on or off.
To use this feature "INFOPagesFix=NO)" has to
be set in LCDS Jobs (PrintLCDS).
Summary of ACCT command parameters
Offline
y
Online DJDE
y y
63