When The Machine Is Turned On; To Turn Off The Machine - Minolta Di2510f Advanced Information

Hide thumbs Also See for Di2510f:
Table of Contents

Advertisement



When the machine is turned on

§
A few seconds after the machine is turned on, the message "Now
warming-up. Ready to scan." appears in the touch panel and the
indicator on the [START] lights up in green. When the indicator on the
[START] key lights up in green, a job can be queued.
When the power switch is on, and the sub power switch is in the off
position, copies can not be taken.

To turn off the machine


Touch [ACTIVITY LIST] to check
that no jobs are queued.

If any printed pages remain in the
paper output tray, remove them.

Press the sub power switch to turn
off the machine.

Set the power switch to "O".
Tip
Normally, it is not necessary to set the power switch to "O".
Note
When turning the machine off, then on again, wait five seconds after
turning it off before turning it on again. If no time passes between
turning the machine off until turning on again, the machine may not
operate correctly.
Do not turn off the machine while it is making copies or printing,
otherwise a paper misfeed may occur.
Do not turn off the machine while it is scanning or sending or receiving
data, otherwise all scanned data or transmission data will be deleted.
Do not turn off the machine while a queued job or stored data is
waiting to be printed, otherwise the jobs will be deleted.
4-10
Before Making Copies
Di2510f/Di3510f

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di3510f

Table of Contents