Turning On And Off And Initial Mode; Turning On And Off; When Machine Is Turned On; Initial Mode - Minolta DI450 Operator's Manual

2-18

6. Turning ON and OFF and Initial Mode

Turning ON and OFF

When Machine is Turned ON

When the Power Switch is turned ON, the Start key lights up orange.
In about a few seconds, the message "Now warming-up. Ready to scan." appears and the Start key lights
up green. The machine thereafter enables its auto copy start function.
At this time, however, pressing the Start key does not start a copy cycle. The machine needs a warm-up
period of about 4 minutes (at a room temperature of 23°C).

Initial Mode

When the Power Switch is turned ON, the Basic screen appears on the Touch Panel. The settings on this
screen are called the initial mode, serving as the reference for all panel settings to be later made.
Useful Tip
User's Choice can be used to change the settings of initial mode.
• Turning the Machine ON:
Press the Power Switch to the
• Turning the Machine OFF:
Press the Power Switch to the
position.
NOTE
The Auto Shut OFF function will automatically
shut down the machine a given period of time
after the last activity.
4002O108AB
No. of copies selected: 1
Finishing
Zoom
Paper
Density
Orig. Copy : Single-Sided
4003P001CA
(ON) position.
(OFF)
p. 2-19
p. 2-19
: Non-Sort
: ×1.000
: Auto Paper
: Auto (Text)
Single-Sided
p. 5-12