Table of Contents
Advertisement
Inserting the Destination
It is possible to add the TSI name and destinations name before
transmission.
Set the original in the paper feed tray or on the glass.
Press the [FAX/SCAN] key.
Touch [FAX MENU].
Touch [SET 1], then touch
[DEST.INSERT].
Designate the destination.
H
Designation using the One-
touch keys (See page 6-30).
H
Performing dial transmission
(See page 6-11).
H
Designation using a fax
program (See page 6-33).
Press the [START] key.
H
The designated destination insertion is released once transmitted.
Tip
Refer to the destination registered in the one-touch keys for
destination name insertion. It is necessary to register the destination
beforehand in the one-touch keys.
Destination insertion cannot be designated during dial transmission or
chain-dial transmission. These TSI can be up to 20 characters in
length.
Destination insertion can only be set when the TSI in set. For details,
refer to "Registering TSI Names" on page 12-24.
6-40
Fax Operations
Di2510f/Di3510f
Advertisement
Table of Contents
