Table of Contents
Advertisement
Specifying Copy Settings
Note
A stapling setting cannot be selected if another job has been
interrupted.
When making copies while using a staple setting, be careful of the
selected stapling position.
For details, refer to "Notes on the Staple Position" on page 10-10.
If "Corner Staple" was selected, the stapling position cannot be
specified. However, if the "Corner Staple" setting is used together
with the "Hole Punch" setting, the stapling position can be specified.
If a document positioned on the original glass is copied using a
stapling setting, copying is automatically performed using the
"Separate Scan" function.
For details, refer to chapter "6 Fax Operations".
When copying while using a stapling setting, be sure that the
maximum number of pages that can be stapled together is not
exceeded.
Where you do not set the position, the stapling position is
automatically specified.
Di2510f/Di3510f
10-7
Advertisement
Table of Contents
