When The Machine Is Turned On; To Turn Off The Machine - Minolta Di2010f User Manual

3.5 Turning the Machine On and Off

When the machine is turned on

➜
A few seconds after the machine is turned on, the message "Now warming-up.
Ready to scan." appears in the touch panel and the indicator on the [Start] lights
up in green. When the indicator on the [Start] key lights up in green, a job can
be queued.
If the power switch is set to "I" while the sub power switch is in the off position, the
machine is turned on, but, after a few seconds, the touch panel goes off.
If no operation is performed for one minute, the machine enters Sleep mode.

To turn off the machine

1
Touch [Activity List] to check that
no jobs are queued.
2
If any printed pages remain in the
paper output tray, remove them.
3
Press the sub power switch to turn
off the machine.
4
Set the power switch to "O".
Tip
Normally, it is not necessary to set the power switch to "O".
Note
When turning the machine off, then on again, wait five seconds after turning
it off before turning it on again. If no time passes between turning the ma-
chine off until turning on again, the machine may not operate correctly.
Do not turn off the machine while it is making copies or printing, otherwise a
paper misfeed may occur.
Do not turn off the machine while it is scanning or sending or receiving data,
otherwise all scanned data or transmission data will be deleted.
Do not turn off the machine while a queued job or stored data is waiting to
be printed, otherwise the jobs will be deleted.
Di2010f/Di2510f/Di3010f/Di3510f
3
3-11