Table of Contents
Advertisement
5.2
Making Basic Copies
The procedure for making basic copies is described below.
Position the document(s) to be copied.
H
For details, refer to chapter "9 Original Documents".
Press the [Copy] key.
The Basics screen appears in the
touch panel.
Specify any necessary copy
settings.
H
To change the paper size (paper
drawer), touch [Paper].
For details, refer to "Selecting
the Paper Setting" on
page 8-19.
H
To change the zoom ratio,
touch [Zoom].
For details, refer to "Specifying a Zoom Setting" on page 10-14.
H
To sort, staple or punch holes in the copies, touch [Finishing].
For details, refer to "Specifying Finishing Settings" on page 10-1.
H
To copy a book or copy while using less paper, touch [Orig. >
Copy]. For details, refer to "Selecting the Orig. > Copy Settings"
on page 10-20.
H
To change the density of the copy, touch [Density].
For details, refer to "Specifying a Copy Density" on page 10-32.
H
To erase a margin in the copy, to insert interleave while copying
onto overhead projector transparencies, or to perform any other
special operation, touch [Auxiliary].
For details, refer to chapter "6 Fax Operations".
5-2
Copy Operations
Di2510f/Di3510f
Advertisement
Table of Contents
