Turning On And Off; When The Unit Is Turned On - Minolta Di620PE Operato's Manual

2-8

3. Turning ON and OFF

Turning ON and OFF

When the unit is turned ON

The printer icon on the print station manager screen changes as follows when the power is turned ON.
(1) While the printer is performing a self-test operation during warm-up, or is off-line, busy or in sleep
mode, the icon will turn yellow. The power indicator (green) on the panel will be blinking.
(2) If a printer system error occurs, the icon will turn red. The error indicator (red) on the panel will be
blinking.
(3) When the printer enters the print-ready state, the icon will turn light green. The power indicator
(green) on the panel will be on.
However, the printing operation cannot be performed even if data from the computer is sent at this time.
A warm-up time of approximately seven minutes (at a room temperature of 20ºC (68ºF)) is required
before printing can be performed.
NOTE
If the fusing temperature drops excessively during a multi-print cycle, there is a possibility that the
printing speed will be reduced. The printing speed will automatically return to normal when the fusing
temperature rises enough to ensure good fusing performance.
Di620PE Operator's Manual
• Turning the Printer ON:
Press the Power Switch to the
• Turning the Printer OFF:
Press the Power Switch to the
position.
4115O050AB
• Click this icon to display any current error messages on the
Summary page of the printer driver screen.
• If the icon is red with black stripes, the Di620PE is powered
off.
• If the icon is dark green, the PlintLink is powered off or the
interface is disconnected.
(ON) position.
(OFF)