Utility Mode Operations
To set the "LCD Back-light Off" function
This function is used to specify when the backlight for the touch panel
automatically goes off after no operation is performed for the set length
of time.
A copy job can even be received while the LCD Back-light is off.
Press the [UTILITY] key.
Touch [USER SET], and then touch [USER'S CHOICE].
Touch [3/6], and then touch [LCD
BACK-LIGHT OFF].
Press the [C] (clear) key to erase the
value.
Use the keypad to specify the
desired length of time, and then
touch [ENTER].
(Specify a length of time between 1
and 240 minutes.)
Touch [END] to return to the Utility
screen, and then touch [EXIT] to return to the Basics screen.
Tip
If the preheat and sleep settings are short because of the LCD Back-
light being set to off, then the Backlight will be turned off after the
specified preheat or sleep time.
Di2510f/Di3510f
7-17