Loading Paper Into The Multiple Bypass Tray; To Load Plain Paper - Minolta Di2510f Advanced Information



Loading Paper Into the Multiple Bypass Tray

Use the multiple bypass tray when printing on plain paper, postcards,
envelopes, overhead projector transparencies and label sheets. The
copy will be made on the side facing down.
Note
To set paper other than plain paper, settings must be made in the
touch panel.

To load plain paper


Open the multiple bypass tray.
When loading large-sized paper,
open the tray extension.

Adjust the paper guides to fit the
size of the paper, and then insert
the paper as much as possible into
the feed slot.
Note
Do not load so much paper that the
top of the stack is higher than the M
mark.
Make sure that the paper guides are pushed up against the edges of
the paper.
8-10
Copy Paper
Di2510f/Di3510f