12.10 Transmission Settings - Minolta Di2510f Advanced Information



12.10 Transmission Settings

This section describes settings for transmission functions carried out by
the administrator.
Transmission Settings
Quality/
Mode
Communi-
cation
menu
12-28
Priority quality Sets the default quality value for each
operation.
The default value from the factory is
"Standard".
Priority contrast Sets the default contrast value for each
operation.
The default value from the factory is
"Normal".
Transmission Sets whether to return to memory
transmission or real-time transmission after
an operation.
The default value from the factory is "Memory
TX".
TSI Position Sets the position of the TSI name added to
transmitted originals.
The default value from the factory is "On the
Doc".
TSI Selection Sets the default TSI name after each
operation for when multiple TSI names are
registered.
The default value from the factory is "1".
Rotation Sets whether to return to rotation
transmission transmission or not after each operation.
The default value from the factory is "ON".
Two-sided Sets the margin for two-sided transmissions.
transmission The default value from the factory is "No".
Administrator Management Operations
Di2510f/Di3510f