Performing Dial Transmission - Minolta Di2510f Advanced Information

Hide thumbs Also See for Di2510f:
Table of Contents

Advertisement

Fax Operations
6.2

Performing Dial Transmission

Item
Dial Transmission
When the Destination
Is Busy
When the Memory
Remaining Is Low
When Using an IP
Phone
When Using a PBX
Using VoIP
Technology
When Using Direct
Dialing to
Communicate with
Overseas Destinations
When Transmission
Fails
Di2510f/Di3510f
Explanation
When the fax machine is transmitting/receiving
another document, the original is first scanned. When
the transmission/reception is complete, the
destination address is dialed, and the document is
transmitted.
If the recipient's line is busy, or the call can not be
completed, the machine can automatically redial (auto
redial). If another document is reserved for
transmission, the reserved document is transmitted,
and auto redial is carried out.
If there are many documents accumulated in the
memory, transmission may not be possible. In such
case, wait for the memory remaining to increase, or
use real-time transmission.
The communication quality may degrade on IP phones
due to the condition of the line (such as ADSL) and
Internet connection. In particular, normal fax
transmission may not be possible.
If errors occur frequently when using the fax machine
over the IP phone, transmit/receive the document over
the PSTN.
For the procedure of transmitting fax over the PSTN,
see the operation manual of the IP phone connection
device that you are using or contact your IP phone
company.
In the case of a PBX using VoIP technology,
configuration must be made on the PBX switch to
connect the facsimile.
If the country code and destination number are
entered after the international code, you may hear a
busy tone during dialing and transmission may not be
possible.
In such cases, press the [PAUSE] key twice after
entering the international code to insert an approx.-6-
second pause, and then enter the rest of the number.
If this still fails to connect the call, perform manual
transmission.
If transmission fails such as when the destination fax
is busy, a TX report is printed. TX reports are not
printed for real-time transmission. You can resend
documents that could not be initially sent (Max. 20
documents).

6-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Di3510f

Table of Contents