Table of Contents
Advertisement
6.9
Transmitting Various Faxes
Transmitting by a One-touch Key
Perform the following procedure after storing the destination number
beforehand in the one-touch keys. For how to register for one-touch
keys, refer to "One-Touch Dial Number Registration" on page 11-5.
Set the original in the paper feed tray or on the glass.
Press the [FAX/SCAN] key.
Touch [ONE-TOUCH] and
designate the destination.
H
Multiple destinations can be
selected. Up to a maximum of
300 destinations can be
specified.
H
If you touch a key mistakenly,
pressing the same key again will
release it.
H
It is possible to check the content of all faxes to be sent by
pressing the [MODE CHECK] key after designating the
destination.
Press the [START] key.
When the original is set on the original glass, after is scanned, touch
[SCAN END].
Check the transmission content in the notification screen.
When multiple destinations have been specified, check the
transmission content of each transmission in the notification screen,
and touch [ENTER].
6-30
Fax Operations
Di2510f/Di3510f
Advertisement
Table of Contents
