To Make Settings For The "Edge/Frame Erase" Function - Minolta Di2510f Advanced Information



To make settings for the "Edge/Frame Erase" function


Load the document into the duplexing document feeder or position it
on the original glass.

Press the [COPY] key.

Touch [AUXILIARY], and then touch
[EDGE/FRAME ERASE].

Select the desired Edge/Frame
Erase setting.

Touch the big arrow keys to specify the width of the erased area, and
then touch [ENTER].
If [CANCEL] is touched, the setting is cancelled.

Press the [START] key.
The copies are printed.
5-18
Copy Operations
Di2510f/Di3510f