To Set The "Auto Panel Reset" Function - Minolta Di2510f Advanced Information



To set the "Auto Panel Reset" function

This function is used to specify when the Basics screen is automatically
displayed if no operation is performed while a program or settings are
being specified.

Press the [UTILITY] key.

Touch [USER SET], and then touch [USER'S CHOICE].

Touch [3/6], and then touch [AUTO
PANEL RESET].

Select the desired length of time
until the Basics screen is displayed,
and then touch [ENTER].
H
The length of time until the
Basics screen is displayed can
be set to 30 seconds, 1, 2, 3 or
5 minutes, or [NO RESET].

Touch [END] to return to the Utility
screen, and then touch [EXIT] to return to the Basics screen.
7-18
Utility Mode Operations
Di2510f/Di3510f