Table of Contents
Advertisement
To disable the Sleep function ("Disable Sleep Mode" parameter)
This parameter is used to disable the Sleep function, which automatically
turns off the printer heater after no operation is performed for a specified
length of time.
Follow the procedure described in "To display the Administrator
Management screens" on page 12-1.
Touch [ADMIN. 1], and then touch [ADMIN. SET].
Touch [DISABLE SLEEP MODE].
Touch [YES] or [NO], and then
touch [ENTER].
If [YES] is selected, [NO RESET]
appears in the screen for the "Sleep
Mode Setting" function, which is
available from the User's Choice
screen.
On the User's Choice [3/6] sleep
mode setting screen, select [NO].
Continue touching [ENTER] to return to the Utility screen, and then
touch [EXIT] to return to the Basics screen.
12-8
Administrator Management Operations
Di2510f/Di3510f
Advertisement
Table of Contents
