To Dehumidify The Duplexing Document Feeder ("Dehumidify" Function); To Replenish The Toner ("Toner Replenisher" Function) - Minolta Di2510f Advanced Information


To dehumidify the duplexing document feeder ("Dehumidify"
function)
When there are rapid changes in the temperature of a room, or high
humidity, condensation may occur on the surface of the photosensitive
receptor drum or the scanner on the machine, resulting in blurred images.
When this occurs, use the "Dehumidify" function (Approximately 5
minutes) to remove the condensation.
If you wish to remove condensation at a set time every day. For details,
refer to "To set the "Scanner Dry" function" on page 7-29.
To specify a time to perform the dehumidifying operation, refer to
page 7-29.

Press the [UTILITY] key.

Touch [User Management], and then touch [DEHUMIDIFY].
The dehumidifying operation begins.
Note
When you wish to remove condensation from the photosensitive
receptor drum, contact your local technical representative.
You can still copy if there during dehumidifying. (however,
dehumidifying will be interrupted.)

To replenish the toner ("Toner Replenisher" function)

This function is used when copies are temporarily faint although plenty of
toner remains, such as immediately after the toner bottle is replaced or
after copying a large quantity of documents with large printed areas. If
this occurs, toner can be replenished.

Press the [UTILITY] key.

Touch [USER MANAGEMENT], and then touch [TONER
REPLENISHER].
The toner is replenished.
7-42
Utility Mode Operations
Di2510f/Di3510f