Administrator Management Operations
12.2
Specifying the Date and Time
To set the date and time
Specify the date and time so that they will be correctly recorded in the
reports.
Follow the procedure described in "To display the Administrator
Management screens" on page 12-1.
Touch [ADMIN. 1], and then touch [INITIAL SETTINGS].
Touch [DATE/TIME SET].
Touch [TIMEDATE].
Use the keypad to type in the
current date and time, and then
touch [ENTER].
H
To erase the entered value,
press the [C] (clear) key.
H
Touch the button for the year,
month, day, hour or minutes,
and then use the keypad to
enter the value.
H
Enter four digits for the year.
H
Enter the time in the 24-hour format.
Di2510f/Di3510f
12-3