Loading Tabbed Sheets In Tray - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Supplies & Handling
4.1.2

Loading Tabbed Sheets in Tray

Tabbed sheets can be used if the tray paper size is specified as tabbed
sheets in the Tray Setting or Paper Presetting. Follow the procedure below
to supply the tray with tabbed sheets.
Example: 9 Tabbed sheets loaded in position for 3 finished sets.
Loaded in Tray
1 or 2
1st TAB
2nd TAB
1
Withdraw the tray.
The tray paper size should be specified as tabbed sheets.
Note
For details, refer to "Using Paper Not Specified for Any Tray (Paper Pre-
setting)" on page 6-48.
2
Open the paper feed roller.
3
Place paper on the tray.
Place paper referring to the illustration shown above.
Reminder
Do not load above the limit level on the side guide plate.
bizhub PRO 1050
Loaded in Tray
3,4 or 5
3rd TAB
1st TAB
2nd TAB
3rd TAB
4
1st TAB
2nd TAB
3rd TAB
3 finished sets
4-7