Konica Minolta BIZHUB PRO 1050 Operator's Manual page 219

Applications
!
Details
Entering Page Numbers
For example, if insertion locations are [2/2/6], scanned images will be in-
serted as follows:
The first scanned image will be inserted after page 2.
The second scanned image will be inserted directly after the first scanned
Image insertion.
The third scanned image will be inserted after page 6.
Note
When a page number is larger than the total original count, a sheet is in-
serted as the last page.
Insertions occur in sequence, even if page numbers are entered out of
sequence.
Entering the same page number twice will insert two sheets at that loca-
tion.
Option
Touch [Booklet] on the Image Insert Screen to use this function.
4
When all page number entries are made, touch [OK].
The Application popup menu will be restored.
!
Details
To cancel the setting, touch [Cancel].
To cancel the function without clearing the setting made, touch [Function
OFF].
5
Touch [OK] on the Application popup menu.
The Copy Screen will be restored.
The Memory Scan key on the Copy Screen appears highlighted to
show that the Memory Scan mode is automatically selected.
6
Enter the desired print quantity from the control panel keypad.
7
Scan the document feeder images
Position originals FACE UP in the document feeder.
If the number of originals exceeds 100, divide them into blocks not ex-
ceeding 100 sheets and load them from the block with the first page.
bizhub PRO 1050
8
8-31