Konica Minolta BIZHUB PRO 1050 Operator's Manual page 585

Machine Manager Setting
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [03 IPP].
2
For each item, select or enter a required value. Use [Previous] or [Next]
as required.
IPP Setting
- IPP
Specify to use IPP or not.
- IPP Print Job Accept
Specify to accept IPP print jobs or not.
IPP Operation Support Information Setting
The following items can be specified by selecting [On] or [Off].
- Print Job
- Cancel Job
- Job Acquisition
- Enable Job
- Job Attribute Acquisition
- Print Attribute Acquisition
IPP Printer Information Setting, Printer URI Setting
- Printer Name
Touch [Printer Name] to display an input screen. After entering in
the field, touch [OK].
- Printer Establishment Place
Touch [Printer Establishment Place] to display an input screen. Af-
ter entering in the field, touch [OK].
- Printer Information
Touch [Printer Information] to display an input screen. After entering
in the field, touch [OK].
- Printer URI
Maximum eight addresses are set automatically.
3
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
4
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
5
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
bizhub PRO 1050
17
17-81