Konica Minolta BIZHUB PRO 1050 Operator's Manual page 494

16
Procedure
1
Touch [03 Copy Setting] - [01 Reset Setting].
2
Touch [02 Reset Function Setting].
3
Select the copying conditions when resetting the machine.
- AUTO RESET Key Setting:
Touch [Full Auto] to set to the factory default setting (Full Auto).
- Touch [Initial Setting] to set as "03 Copy Setting - 01 Reset Setting
- 01 Initial Setting".
- Each Reset Setting:
Touch [Mode Memory(30)] to set to the copying conditions preset
to Mode Memory 30.
- In order to specify the setting selected in [01 Initial Setting] of [03
Copy Setting] as the copying conditions when reset, select [Initial-
ize Set].
Note
When [Initial Setting] is selected for [AUTO RESET Key Setting], [Each
Reset Setting] becomes enabled.
4
Select Output Application for Full Auto.
Touch any key on the right side of [Finisher Mode for Full Auto].
5
Touch [OK] to complete the setting and return to the Reset Setting
Menu Screen.
6
Touch [Return] to restore the Utility Menu Screen.
16-34
User Setting
bizhub PRO 1050