Konica Minolta BIZHUB PRO 1050 Operator's Manual page 437

Controller Setting
%
Touch [01 Basic Setting]. The Basic Setting Menu Screen will be dis-
played.
%
Make the desired setting. Touch [Next] or [Forward] to scroll to the de-
sired item.
The following settings are used unless otherwise specified by the print-
er driver.
- 01 PDL:
Select the page description language to be initially used.
- 02 Paper Feed Tray:
Select the paper feed tray to be initially used.
- 03 Output Tray:
Select the exit tray to be initially used.
- 04 Duplex:
Select to allow double-sided printing.
- 05 Binding:
Select the binding position to be initially used in double-sided print-
ing.
- 06 Staple:
Select the staple position to be initially used.
- 07 Punch:
Select the punch position to be initially used.
- 08 Center Staple/Center Fold/Trimming:
Select the initial setting for each function.
- 09 Offset:
Select to use the offset function.
- 10 Output Order:
Select to exit face up or face down in initial state.
- 11 Image Order:
Select the print page order in initial state.
- 12 Print Number:
Specify the print quantity in initial state.
- 13 Sort:
Select to use the Sort mode.
- 14 Paper Size:
Select the paper size to be initially used.
- 15 Orientation:
Select the orientation of the image printed on copy paper.
- 16 Banner Option:
Select to print the banner page.
- 17 Banner Tray:
Select the paper feed tray for printing banner page.
- 18 Convert Paper Size:
Select to change the paper size.
- 19 Combination:
Specify the desired combination function.
bizhub PRO 1050
14
14-11