Page 1 Printer Chapter 1 : Introduction Chapter 2 : Overview Chapter 3 : Installation of the printer driver (Windows) (Easy installation using the installer) Chapter 4 : Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Chapter 5 : Installation of the printer driver (Macintosh) Chapter 6 : Uninstallation of the printer driver Chapter 7 : Basic Printing and Various Function Chapter 8 : PCL Printer Driver Setting (Windows)
Page 2: Table Of Contents
Table of contents Table of contents Introduction Composition of User’s Guide ............1-4 Folder structure on the CD-ROM (bizhub PRO 1200/1200P/1051 Driver CD-ROM) ......1-6 Folder structure on the CD-ROM (bizhub PRO 1200/1200P/1051 Driver CD-ROM for Macintosh) ... 1-7 About this Manual ................1-8 Notation of each product ...............
Page 3 Table of contents 4.2.4 Local connection ................4-13 Windows Vista/Server 2008 ............4-15 4.3.1 Network connection (Port9100/LPR/SMB) ........4-15 4.3.2 Network connection (IPP or IPPS) ..........4-21 4.3.3 Network connection (Web Service print) ........4-23 4.3.4 Local connection ................4-26 Windows XP/Server 2003 ...............
Page 4 Table of contents Basic Printing and Various Function Basic Printing Method ..............7-1 Various Function ................7-4 7.2.1 To set the paper-related items ............7-4 7.2.2 To set the paper tray ..............7-7 7.2.3 To print multiple copies ..............7-11 7.2.4 To print multiple pages ..............
Page 5 Table of contents 8.18 Other tab ..................8-71 8.19 Favorite Setting ................8-73 8.20 About View Area ................8-76 PostScript PPD Printer Driver setting (Windows) About Properties window ..............9-1 9.1.1 Properties window ................. 9-2 About button ..................9-3 Combination of the function ............9-4 General tab ..................
Page 6 Table of contents 11.3 General Problems of PostScript ............ 11-4 11.4 Checking on Incomplete Jobs ............11-6 12 Font 12.1 Font List (PCL) ................12-1 12.2 Font List (PostScript) ..............12-2 12.3 Screen Fonts ................... 12-3 12.4 Font Management Utility ..............12-6 13 Utility Tool 13.1 PageScope Web Connection ............
Page 7: Introduction
Introduction Introduction Thank you very much for purchasing the bizhub PRO 1200/1200P/1051. This User’s Guide describes the operating procedures and safety precau- tions of the bizhub PRO 1200/1200P/1051 so that you can handle it safely and make the best of its capabilities. Usually keep this User’s Guide close at hand for the convenience of reference later.
Page 8 Introduction ACKNOWLEDGEMENT: KONICA MINOLTA, KONICA MINOLTA logo, and the essentials of imaging are registered trademarks of KONICA MINOLTA HOLDINGS, INC.. bizhub, bizhub PRO and PageScope are trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.. SOFHA is a registered trademarks of SOFHA GmbH Corporation in the Unit- ed States, in the Japan and in other countries.
Page 9 Other company names and product names used in this User’s Guide are the registered trademarks or trademarks of their respective companies. COPYRIGHT © 2010 Konica Minolta Business Technologies, Inc., All rights reserved. COPYRIGHT © 2004 Adobe Systems Incorporated. All rights reserved.
Page 10: Composition Of User's Guide
Introduction Composition of User’s Guide This machine is provided with the following user’s guides. User’s Guide - Copier (Printed matters), (User’s Guide CD) This guide describes an outline of the machine and copy operations. For bizhub PRO 1200P, it is not contained in the same package. Please refer to this guide for safety information, turning on/off the machine, paper supply, dealing with machine trouble such as paper jam, and copy op- eration available on the machine.
Page 11 Introduction User’s Guide - Printer (PostScript3 Plug-in Driver) (User’s Guide CD) This guide describes the operation of the printer function equipped for the machine as standard. Please refer to this guide for how to use Plug-in driver in user mode. Operation Quick Guide (Printed matters) The descriptions given in this guide are excerpts from the operation section of frequently used functions.
Page 12: Folder Structure On The Cd-Rom (Bizhub Pro 1200/1200P/1051 Driver Cd-Rom)
Introduction Folder structure on the CD-ROM (bizhub PRO 1200/ 1200P/1051 Driver CD-ROM) The folders included on the accompanying bizhub PRO 1200/1200P/1051 Driver CD-ROM (Driver CD) for image controller are structured as shown be- low. This illustration will be helpful for locating specific folders or files. - In this manual, folder names and file names are not necessarily preceded by the root directory.
Page 13: Folder Structure On The Cd-Rom (Bizhub Pro 1200/1200P/1051 Driver Cd-Rom For Macintosh)
Introduction Folder structure on the CD-ROM (bizhub PRO 1200/ 1200P/1051 Driver CD-ROM for Macintosh) The folders included on the accompanying bizhub PRO 1200/1200P/1051 Driver CD-ROM (Driver CD) for PostScript 3 are structured as shown below. This illustration will be helpful for locating specific folders or files. - In this manual, folder names and file names are not necessarily preceded by the root directory.
Page 14: About This Manual
This manual assumes you are familiar with the basic operation of your oper- ating system and the KONICA MINOLTA copier. The KONICA MINOLTA copier comes is with User’s Guide. Refer to these manuals as needed. For detailed operations of Windows and Mac OS, refer to the operating man- uals for each operating system.
Page 15 Introduction Chapter 14 Appendix This chapter lists and describes technical terms to read this manual. bizhub PRO 1200/1200P/1051 Printer...
Page 16: Notation Of Each Product
Introduction Notation of each product The following abbreviations are used in this manual: 1. Image controller Image controller 2. bizhub PRO 1200/1200P/1051 Printer/Copier: copier (or main body printer) 3. A printing system that combines the above (1) and (2) products: printing system 4.
Page 17: How To Read This Manual
Introduction How to read this Manual Various Function Various Function This chapter describes basic printing method from application, and various functions. Basic Printing method (Windows) Show an object and feature of a procedure. The following shows the basic methods for the printing from a Windows. This pages is explained by using Windows Vista.
Page 18: Software License Agreement
Introduction SOFTWARE LICENSE AGREEMENT SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the Printing Software (“Host Software”), and related explanatory written materials (“Doc-...
Page 19 Introduction 9. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software that Licensee does not use, or Software contained on any unused media, except as part of the permanent transfer of all Software and Documentation as described above. 10.
Page 20 Introduction SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system (“Printing Software”), the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Pro- grams”), other software which runs on a computer system for use in conjunc-...
Page 21 Introduction unused media, except as part of the permanent transfer of all Software and Documentation as described above. 9. IN NO EVENT WILL KMBT OR ITS LICENSOR BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL INDIRECT, PUNITIVE OR SPE- CIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST SAVING, EVEN IF KMBT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY.
Page 22: Overview
Overview Overview The image controller feature enables the copier to connect to computers and networks to use as a printer. Copier bizhub PRO 1200/1200P/1051 Printer...
Page 23: Printer Driver
Overview Printer Driver This printing system is equipped with the PCL and the PostScript3 (Post- Script PPD/PS Plug-in) printer functions. In order to use this printing system, it is necessary to install a printer driver in a computer. Printer Driver Compliant OS PCL Printer Driver Windows 2000 Professional SP4 later...
Page 24 Overview Note Refer to "Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)" on Page 4-1 and "Installation of the printer driver (Macintosh)" on Page 5-1 for more information about installation of printer driver. Refer to the “User’s Guide (PostScript3 Plug-in Driver)” for more informa- tion about Plug-in Driver.
Page 25: Composition Of A Product
Overview Composition of a product This image controller is equipped with an Ethernet compatible network port and a USB port (USB 2.0). 2.2.1 Memory The image controller is equipped with 2GB memory by default. 2.2.2 Other options The following options installed on the printer enables variable functions. - Paper Source option (PF-702/PF-703) enables to select Tray 3 - Tray 8.
Page 26: Connections Of The Image Controller
Overview Connections of the Image Controller You can use the copier as a printer by connecting image controller to a com- puter (using with USB connection) or a network (using with Ethernet connec- tion). 2.3.1 Ethernet Connection You can also connect the copier to computers supporting Ethernet. Several alternatives can be considered in the Ethernet connection.
Page 27: Product Specifications
Overview Product Specifications Type Type: Built-in box type for the KONICA MINOLTA Printer/ Copier Functions Resolution: 600 x 600 dpi 1200 x 1200 dpi Gradation: binary Printable Area: Standard: Margin 3.18 mm (left, right, top and bottom without variation) Non-standard pa-...
Page 28: Restrictive Conditions
Overview Printing Method: SMB printing (TCP/IP) / LPD/LPR (TCP/IP) / RAW (Port9100, Setting can be made for up to 6 ports) /IPP (TCP/IP), Web service print (TCP/IP), Bonjour (TCP/IP), Pserver (IPX/SPX) / NPrinter/RPrinter (IPX/SPX) / Ap- pleTalk (EtherTalk) Compliant Web Microsoft Internet Explorer 6 or later* recommended Browser: (JavaScript enabled)
Page 29: Installation Of The Printer Driver (Windows) (Easy Installation Using The Installer)
Installation of the printer driver (Windows) (Easy installation using the installer) Installation of the printer driver (Windows) (Easy installation using the installer) This installer automatically detects whether this machine is connected via USB or on the same TCP/IP network as the computer, then installs the required printer driver.
Page 30 Installation of the printer driver (Windows) (Easy installation using the installer) Read through the License Agree- ment and click [AGREE]. – Language for the display can be changed in the pull-down menu on the lower left side of the win- dow.
Page 31 Installation of the printer driver (Windows) (Easy installation using the installer) – If the connection of this machine cannot be recognized, or when specifying manually: To specify a unit manually, select [Specify the Printer/MFP Except for the Above (IP Address, Host Name...)] and click the [Refer to...].
Page 32 Installation of the printer driver (Windows) (Easy installation using the installer) Detail Click the buttons as follows: To check the details of the printer driver again: ......[Review] To change the printer name: ........[Rename Printer] To see the property of printer: ..........[Property] To see the printing setup: ..........
Page 33: Installation Of The Printer Driver (Windows) (Manual Installation Using The Add Printer Wizard)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) The explanation here is given of how to install a Windows printer driver using the additional function of a Windows standard printer, without using an in- staller for a Windows compatible computer.
Page 34: Windows 7
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Windows 7 4.2.1 Network connection (Port9100/LPR/SMB) For Windows 7, an installation can be made either by searching a printer on the network or creating a printer port. TCP/IP setting for this machine Specify the IP address on TCP/IP Setting of this machine.
Page 35 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Select [Add a network, wireless or Bluetooth printer]. The connected printers are found. Select this machine from the list, and then click the [Next]. – When using the LPR/Port9100 protocol, select the printer having its IP address.
Page 36 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click [Next]. Follow the on-screen instructions. – If the [Windows Logo Testing] or [Digital Signature] dialog box ap- pears, click the [Continue] or [Yes]. Click [Finish]. When installation is complete, make sure that the icon of the installed printer appears in the [Devices and Printers] window.
Page 37 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Printer driver installation by creating a port using the Add Printer Wizard 0 The installation should be performed by a qualified system administrator or printer administrator. Insert the Driver CD into the CD-ROM drive of the computer. Click the [Start], and then click [Devices and Printers].
Page 38 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – When using an SMB connection, enter “\\NetBIOS name\print serv- ice name” in the “Enter a port name” box. – Enter the same NetBIOS name and print service name those appear in “Print Setting”...
Page 39 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click the [Next]. Follow the on-screen instructions. – If the [Windows Logo Testing] or [Digital Signature] dialog box ap- pears, click the [Continue] or [Yes]. Click the [Finish]. After installation is completed, make sure that the icon of the installed printer appears in the [Devices and Printers] window.
Page 40: Network Connection (Ipp Or Ipps)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.2.2 Network connection (IPP or IPPS) In the case of IPP print, set a port while in the installation of a printer driver. TCP/IP setting for this machine Specify the IP address on TCP/IP Setting of this machine.
Page 41 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click [Add a network, wireless or Bluetooth printer]. The connected printers are found. In the window showing the search results, click [The printer that I want isn’t Listed]. In the [Select a shared printer by name] box, enter the URL for the cop- ier in the following format, and then click the [Next].
Page 42 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – If the [Windows Logo Testing] or [Digital Signature] dialog box ap- pears, click the [Continue] or [Yes]. Click the [Finish]. When the installation is completed, make sure that the icon of the in- stalled printer appears in the [Devices and Printers] window.
Page 43: Network Connection (Web Service Print)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.2.3 Network connection (Web Service print) In Windows 7, Web Service print-supporting printers on the network can be located and installed. TCP/IP setting for this machine Specify the IP address on TCP/IP Setting of this machine. For details on specifying the IP address of this machine, refer to the User’s Guide [POD Administrator’s Reference or Main Body].
Page 44 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click [Skip obtaining driver software from Windows Update]. Click [Yes]. Click [Close]. Right-click the printer icon in the [Devices and Printers] window, and select [Properties]. Select the [Hardware] tab, select [WSD Print Device] in which [Type] is displayed as [Other devices] and click [Properties].
Page 45: Local Connection
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.2.4 Local connection The printer driver can be installed with plug-and-play. Detail You may be possible to skip step 3 to 5 to install faster by selecting [No let me choose what to do] - [Never install driver software from Windows Update] in the [Hardware] tab in the [System Properties] screen.
Page 46 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click [Next]. – Installation is started. – If the Verify the publisher dialog box of [Windows Security] appears, click [Install this driver software anyway]. Click [Close] when the installation is completed. Remove the CD-ROM from the CD-ROM drive.
Page 47: Windows Vista/Server 2008
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Windows Vista/Server 2008 4.3.1 Network connection (Port9100/LPR/SMB) For Windows Vista/Server 2008, an installation can be made either by searching a printer on the network or creating a printer port. TCP/IP setting for this machine Specify the IP address on TCP/IP Setting of this machine.
Page 48 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Select [Add a network, wireless or Bluetooth printer]. Select this machine from the list, and then click the [OK]. – When using the LPR/Port9100 protocol, select the printer having its IP address.
Page 49 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click [Next]. Follow the on-screen instructions. – If the Windows Logo Testing or Digital Signature dialog box ap- pears, click the [Continue] or [Yes]. Click [Finish]. When installation is complete, make sure that the icon of the installed printer appears in the Printers window.
Page 50 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click “Add a printer” from the toolbar. The Add Printer window appears. Click “Add a local printer”. The Select a Printer Port dialog box appears. Click “Create a new port”, and select the port type. –...
Page 51 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click the [Next]. – If the Additional Port Information Required dialog box appears, go to step 10. – If the Install the printer driver dialog box appears, go to step 13. Select “Custom”, and then click the [Settings].
Page 52 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Follow the on-screen instructions. – If the User Account Control window appears, click the [Continue]. – If the Verify the publisher dialog box of Windows Security appears, click “Install this driver software anyway”.
Page 53: Network Connection (Ipp Or Ipps)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.3.2 Network connection (IPP or IPPS) In the case of IPP print, set a port while in the installation of a printer driver. TCP/IP setting for this machine Specify the IP address on TCP/IP Setting of this machine.
Page 54 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) The connected printers are found. In the window showing the search results, click “The printer that I want isn’t Listed”. In the “Select a shared printer by name” box, enter the URL for the cop- ier in the following format, and then click the [Next].
Page 55: Network Connection (Web Service Print)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.3.3 Network connection (Web Service print) In Windows Vista/Server 2008, Web Service print-supporting printers on the network can be located and installed. TCP/IP setting for this machine Specify the IP address on TCP/IP Setting of this machine.
Page 56 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click [Browse]. Specify the desired folder on the Driver CD that contains the printer driver, and then click the [Open]. – Select printer driver (PCL, PostScript PPD) to be used. –...
Page 57 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) The Printers window appears. Click “Add a printer” from the toolbar. The Add Printer window appears. Click [Add a local printer]. Click [Create a new port]. – Select [Standard TCP/IP].
Page 58: Local Connection
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) The “Printer” list appears. Click the [Next]. Follow the on-screen instructions. – If the “User Account Control” window appears, click the [Continue]. Click the [Finish]. When the installation is completed, make sure that the icon of the in- stalled printer appears in the Printers window.
Page 59 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 1200/1200P/1051 Driver CD- ROM)” on page 1-6. Click [Next] and follow the on-screen instructions. –...
Page 60: Windows Xp/Server 2003
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Windows XP/Server 2003 4.4.1 Network connection (LPR/Port9100) When using the LPR/Port9100 printing, specify the port during the printer driver installation process. TCP/IP setting for this machine Specify the IP address on TCP/IP Setting of this machine. For details on specifying the IP address of this machine, refer to the User’s Guide [POD Administrator’s Reference or Main Body].
Page 61 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – Clear the “Automatically detect and install my Plug and Play print- er” check box. Click “Create a new port”, and select “Standard TCP/IP Port” for “Type of port:”.
Page 62 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Change the settings according to the port, and then click the [OK]. – For an LPR connection, select “LPR”, and then enter “Print” in the “Queue name” box. –...
Page 63: Network Connection (Smb)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.4.2 Network connection (SMB) When using the SMB printing, specify the port by specifying the printer dur- ing the printer driver installation process. Printers can be specified either by searching printers on the network, or by entering the printer name.
Page 64 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – Clear the “Automatically detect and install my Plug and Play print- er” check box. Click “Create a new port”, and select “Local Port” for “Type of port:”. In the “Enter a port name”...
Page 65: Network Connection (Ipp Or Ipps)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – For details of the built-in CD-ROM construction, see “Folder struc- ture on the CD-ROM (bizhub PRO 1200/1200P/1051 Driver CD- ROM)” on page 1-6. Click the [OK]. The “Printer”...
Page 66 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – If “Printers and Faxes” does not appear in the Start menu, open Control Panel from the Start menu, select “Printers and Other Hard- ware”, and then click “Printers and Faxes”. For Windows XP, click “Add a printer”...
Page 67 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – http:// (IP_address_of_machine) /ipp Example: If the IP address of the copier is 192.168.1.20, enter http://192.168.1.20/ipp. – When setting the copier for IPPS printing, enter “https:// (IP_address_of_machine) /ipp”. The window for confirming the user name and password appears in the course of installation.
Page 68: Local Connection
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.4.4 Local connection When this machine is connected via a USB port, the printer driver can be in- stalled with plug-and-play. Connect a USB cable to a USB port (square type) at the rear of the cop- ier and a computer, and then start up the computer.
Page 69: Windows 2000
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Windows 2000 4.5.1 Network connection (LPR/Port9100) When using the LPR/Port9100 printing, specify the port during the printer driver installation process. TCP/IP setting for this machine Specify the IP address in the TCP/IP Setting screen of this machine. For details on specifying the IP address of this machine, refer to the User’s Guide [POD Administrator’s Reference or Main Body].
Page 70 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – Clear the “Automatically detect and install my Plug and Play print- er” check box. The Select a Printer Port dialog box appears. Click “Create a new port”, and select “Standard TCP/IP Port” for “Type of port:”.
Page 71 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Click the [Have Disk]. Click the [Browse]. Specify the desired folder on the Driver CD that contains the printer driver, and then click the [Open]. – Select printer driver (PCL, PostScript PPD) to be used. –...
Page 72: Network Connection (Smb)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.5.2 Network connection (SMB) When using the SMB printing, specify the port by specifying the printer dur- ing the printer driver installation process. TCP/IP setting for this machine Specify the IP address in the TCP/IP Setting screen of this machine.
Page 73 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) – Clear the “Automatically detect and install my Plug and Play print- er” check box. The Select a Printer Port dialog box appears. Click “Create a new port”, and select “Standard TCP/IP Port” for “Type of port:”.
Page 74: Network Connection (Ipp Or Ipps)
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Follow the on-screen instructions. – If the “User Account Control” window appears, click the [Continue]. Click the [Finish]. When the installation is completed, make sure that the icon of the in- stalled printer appears in the Printers window.
Page 75 Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) In the Locate Your Printer dialog box, select “Connect to a printer on the Internet or on your intranet”. In the “URL” field, enter the URL for the copier in the following format, and then click the [Next].
Page 76: Local Connection
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4.5.4 Local connection When this machine is connected via a USB port, the printer driver can be in- stalled with plug-and-play. Connect a USB cable to a USB port (square type) at the rear of the cop- ier and a computer, and then start up the computer.
Page 77: Test
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) Test Page Print You can make sure whether or not the printer driver is installed properly by printing the test page that comes standard in Windows. To print the test page: Select [Start] - [Control Panel] - [Printers].
Page 78: Installation Of The Printer Driver (Macintosh)
Installation of the printer driver (Macintosh) Installation of the printer driver (Macin- tosh) Compliant OS The printer driver is can be used on the following OS: Windows Printer Driver Mac OS X • "Mac OS X (10.3/10.4/10.5)" on Page 5-1 The Driver CD contains the PostScript PPD printer driver.
Page 79 Installation of the printer driver (Macintosh) – As prompted, enter the administrator name and password. For the administrator name and password, contact your network adminis- trator. In the Easy Install dialog box, click the [Install]. Click the [Close]. This completes the printer driver installation. bizhub PRO 1200/1200P/1051 Printer...
Page 80: Selecting And Connecting The Printer (Os 10.4/10.5)
[Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. When [Installable Options] is displayed, select an option that has been equipped to the copier and then click [Continue].
Page 81 Installation of the printer driver (Macintosh) Specifying the AppleTalk settings Enable AppleTalk in “AppleTalk Setting”, and then enter the printer name. For details on the AppleTalk settings of the copier, refer to the User’s Guide [POD Administrator’s Reference or Main Body]. Specifying the AppleTalk settings for the computer On the “Apple”...
Page 82 [Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. When [Installable Options] is displayed, select an option that has been equipped to the copier and then click [Continue].
Page 83 [Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. When [Installable Options] is displayed, select an option that has been equipped to the copier and then click [Continue].
Page 84 [Add]. – In OS 10.5, entering [KONICA MINOLTA] in the text box for search allows you to find a driver with ease. When [Installable Options] is displayed, select an option that has been equipped to the copier and then click [Continue].
Page 85: Selecting And Connecting The Printer (Os 10.3)
[Add]. Select [Rendezvous] as a connection method, and then select an in- tended printer name from among those detected. Select “KONICA MINOLTA” in “Printer Model”, select [KONICA MINOLTA1200/1051PS(P)] from the list of models, and then click the [Add].
Page 86 The connected printers are detected. Select [AppleTalk] as a connection method, and then select an intend- ed printer name from among those detected. Select “KONICA MINOLTA” in “Printer Model”, select [KONICA MINOLTA1200/1051PS(P)] from the list of models, and then click the [Add].
Page 87 Click the [IP Printing]. Select “LPD/LPR” from “Printer Type”. In “Address”, enter the IP address of this machine. Select “KONICA MINOLTA” in “Printer Model”, select [KONICA MINOLTA1200/1051PS(P)] from the list of models, and then click the [Add]. bizhub PRO 1200/1200P/1051 Printer...
Page 88 Installation of the printer driver (Macintosh) – If the selected printer is registered in the printer list, the setting pro- cedure is completed. Specifying the IPP settings Specifying the TCP/IP setting for this machine: Specify the IP address of this machine. IPP setting for the copier: Enable IPP print in the IPP Setting screen of the copier.
Page 89 Installation of the printer driver (Macintosh) Select “KONICA MINOLTA” in “Printer Model”, select [KONICA MINOLTA1200/1051PS(P)] from the list of models, and then click the [Add]. – If the selected printer is registered in the printer list, the setting pro- cedure is completed.
Page 90: Test
Installation of the printer driver (Macintosh) Test Page Print Macintosh Macintosh has no standard test print function. Double-click [ReadMe.txt] in the Driver CD. Then, select [Print...] from [File] menu and make sure it is print- ed properly. bizhub PRO 1200/1200P/1051 Printer 5-13...
Page 91: Uninstallation Of The Printer Driver
If the printer driver was installed with an installer, the delete function of the printer driver is included. Click the [Start], and then select “All Programs” (or “Programs”), select “KONICA MINOLTA”, select “xxxx (product name)”, and then click “Uninstall Printer Driver”. Select the components to be deleted, and then click the [Uninstall].
Page 92: Uninstallation By An Installer (Pcl)
Uninstallation of the printer driver Uninstallation by an installer (PCL) If the printer driver was installed with an installer, it can be deleted by the in- staller. Insert the Driver CD into the CD-ROM drive of the computer. – Check that the installer starts up, and then continue with step 2. –...
Page 93: Deletion Of Printer Driver By Manual Operation
Uninstallation of the printer driver Deletion of printer driver by Manual operation The deleting procedures of the printer driver by manual operation may be dif- ferent depending on the type of the driver and the OS running in the compu- ter.
Page 94 In case of 64bit OS, “C: \WINDOWS\system32\spool\drivers\x64” When you check folders and find a folder of the applicable model, delete it. However, if multiple drivers are installed including the Konica Minolta driver and PostScript Konica Minolta driver, the model information of all drivers is deleted.
Page 95 Uninstallation of the printer driver responding model is available. The PNF file is the same number as the INF file. In Windows Vista , when you have deleted a file using “Re- /7/Server 2008 move driver and driver package”, this operation is not required. bizhub PRO 1200/1200P/1051 Printer...
Page 96: Macintosh
Uninstallation of the printer driver Macintosh If it becomes necessary to delete the printer driver, for example, when you want to reinstall the printer driver, delete the driver according to the following procedure. 6.4.1 For Mac OS X (v10.5) For Mac OS X (v10.5) On the “Apple”...
Page 97: For Mac Os X (V10.3/V10.4)
Drag the following file, which is located in “Library” - “Printers” - “PPDs” - “Contents” - “Resources” - “en.lproj” of “Hard Disk”, to the “Trash” icon. – “KONICA MINOLTA 1200.gz” Delete the unnecessary files from “Library” - “Printers” - “KONICAMI- NOLTA”. –...
Page 98: Basic Printing And Various Function
Basic Printing and Various Function Basic Printing and Various Function This chapter describes basic printing method from application, and various functions. Basic Printing Method Basic Printing method (Windows) The following shows the basic methods for the printing from a Windows. This pages is explained by using Windows Vista.
Page 99 Basic Printing and Various Function Click [Print]. The image controller receives and processes a print job sent from your computer. Note Refer to "PCL Printer Driver Setting (Windows)" on Page 8-1, "PostScript PPD Printer Driver setting (Windows)" on Page 9-1 for more information about print setup.
Page 100 Basic Printing and Various Function Basic Printing method (Mac OS X) The following shows the basic methods for the printing from a Mac OS X. Select [File]-[Print] of the applica- tion. – Command name may be differ- ent depending on the applica- tion.
Page 101: Various Function
To set the orientation: Set the orientation output paper in “Portrait” or “Landscape”. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 PostScript PPD "Layout tab" on Page 9-19 Mac OS X PostScript PPD "Page Attributes (Page Setup window)" on...
Page 102 To set the type of paper: Sets various types of paper as output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 PostScript PPD "Paper/Quality tab" on Page 9-21 Mac OS X PostScript PPD "Setup (Print window)"...
Page 103 To enlarge or reduce by a specified ratio: Prints by specifying a value of enlargement or reduction. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Page Attributes (Page Setup window)"...
Page 104: To Set The Paper Tray
To set the Paper Source unit: You can make the printer driver recognize an optional paper source unit. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Configure tab" on Page 8-12 PostScript PPD "Device Settings tab" on Page 9-14 Mac OS X PostScript PPD "About Mac OS X window"...
Page 105 You can select and set a paper feed tray to be used from the list. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 PostScript PPD "Device Settings tab" on Page 9-14 Mac OS X PostScript PPD "Paper Feed (Print window)"...
Page 106 You can select and set an output tray to be used from the list. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-39 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)"...
Page 107 This printing system enables you to stack a large amount of printed materials on the stacker. You can move around the stacker like a dolly. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Configure tab" on Page 8-12 PostScript PPD "Device Settings tab" on Page 9-14 Mac OS X PostScript PPD "About Mac OS X window"...
Page 108: To Print Multiple Copies
To set the number of copies to be printed: Sets the number of copies to be printed from the [Properties] window. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Copies &...
Page 109 Prints the required number of the first page, and then the required umber of the second pages, the third page. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Copies &...
Page 110: To Print Multiple
To set to print on both sides: Prints continuous multiple pages on both front and back sides. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Layout tab" on Page 8-31 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)"...
Page 111 Allocates the document of 2 pages, 4 pages, 6 pages, 9 pages or 16 pages onto a single page for printing. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Layout tab" on Page 8-31 PostScript PPD "Layout tab" on Page 9-19 Mac OS X PostScript PPD "Layout (Print window)"...
Page 112 Prints a document of 2 pages onto a single paper twice as big as a paper se- lected in the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Layout tab" on Page 8-31 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)"...
Page 113 Prints output paper so that they become a book when they are folded in two. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Layout tab" on Page 8-31 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)"...
Page 114 To print pages in facing up (Face up): Output paper facing up when printing multiple pages. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-39 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)"...
Page 115: To Set The Front / Back Cover, Insertion Sheet And Cover Sheet
Sets a front cover which uses a different paper from that for the body pages. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Cover Mode tab" on Page 8-51 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Setup (Print window)"...
Page 116: To Set An Insertion Sheet
Sets a back cover which uses a different paper from that for the body pages. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Cover Mode tab" on Page 8-51 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Setup (Print window)"...
Page 117 Output a thick paper as a cover, which is different from the output papers set. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Cover Mode tab" on Page 8-51 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Setup (Print window)"...
Page 118: To Set For Finishing
To set stapling: Staple output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-399 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)" on Page 10-25...
Page 119 To use the punch unit, this setting is required to be made in advance. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Configure tab" on Page 8-12 PostScript PPD "Device Settings tab" on Page 9-14 Mac OS X PostScript PPD "About Mac OS X window"...
Page 120 To adjust printing position on the paper (Image Shift): Adjusts the printing position of documents to the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Layout tab" on Page 8-31 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)"...
Page 121 To set Perfect Binding: In this printing system, the setting of the roll-up bookbinding is available. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Finish tab" on Page 8-39 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Finishing (Print window)"...
Page 122: To Set A Watermark
Creates a overlay design that is printed on the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-58 To print a Overlay: Sets a overlay and print it on the output paper. Operating System...
Page 123 Creates a new Watermark printed on the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-58 ABCD COPY To print a Watermark: Sets a transparent character and print it on the output paper.
Page 124 To use the copy protect function: Sets a transparent character and print it on the output paper. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-58 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)"...
Page 125 Basic Printing and Various Function To set numbering: Prints the copy number to the printed page. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Stamp/Composition tab" on Page 8-58 bizhub PRO 1200/1200P/1051 Printer 7-28...
Page 126: To Set An Image And Shade
To print a curved section smoothly (Smoothing): Prints the curved section of characters and images smoothly. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-66 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)"...
Page 127 To set draft print: Prints lightly which is suitable for draft documents. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-66 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Image/Layout (Print window)" on Page 10- To set a printing density: Sets a printing density.
Page 128 Set printing pattern from [Fine] or [Coarse]. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-66 To narrow down a character for ease to read (Fine Line Precision): You can select the level of the thickness of a character. Operating System...
Page 129: To Set Font-Related Items
Selects the font format to be downloaded to the printer (Outline or BMP). Operating System Printer Driver Refer to Windows KONICA MINOLTA "Quality tab" on Page 8-66 To print without using printer fonts: Makes settings so that printing is done without using the printer font. Operating System...
Page 130: 7.2.10 Checking The Printer Driver Setting
To check the current settings before printing (Wait Mode): Check the current settings from the control panel before printing. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 PostScript PPD "Advanced Options windows" on Page 9- Mac OS X PostScript PPD "Security (Print window)"...
Page 131: 7.2.11 How To Store The Job And Reprint
A print job can be saved onto the hard disk of in this printing system, and it can be printed as needed. Operating System Printer Driver Refer to Windows KONICA MINOLTA "Basic tab" on Page 8-16 Mac OS X PostScript PPD "Security (Print window)" on Page 10-31 To print with protection by a password (Secure Print): Protects a print job with a password when printing a confidential document.
Page 132: Pcl Printer Driver Setting (Windows)
PCL Printer Driver Setting (Windows) PCL Printer Driver Setting (Windows) This chapter describes the settings of the PCL printer driver. For settings, use the Properties window. About Properties window This chapter explains the PCL printer driver settings with Properties window of Windows Vista.
Page 133: Properties Window
PCL Printer Driver Setting (Windows) 8.1.1 Properties window You have two ways for selecting or changing settings through the printer driver. How to setup in the Properties window of the Printers window Settings made in the [Properties] of the [Printers] folder are applied to print outs from any application.
Page 134: About Button
PCL Printer Driver Setting (Windows) About button Buttons common to each tab of the [Properties] window are shown below. Button Function When the [OK] is clicked, all tab settings are saved with the close of the properties window. Cancel When the [Cancel] is clicked, all tab settings are cancelled with the close of the properties window.
Page 135: Combination Of The Function
PCL Printer Driver Setting (Windows) Combination of the function When you select a function which causes a confliction with the settings al- ready configured, the message will be displayed This window is a message window to show the reason if a certain combina- tion of functions is unavailable.
Page 136: General Tab
PCL Printer Driver Setting (Windows) General tab Enables printing a test page. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. Location Enters the name of place where the printer is located. For example, “2nd floor”, “Room 101”, “Domain ABC”...
Page 137: Sharing Tab
PCL Printer Driver Setting (Windows) Sharing tab Performs share settings of a printer. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. By using this [Sharing] tab, you can make the printer available to network us- ers.
Page 138: Ports Tab
PCL Printer Driver Setting (Windows) Ports tab Performs settings related to ports. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. Add Port Using this button enables you to add a new port for Vendor-specific port monitor, TCP/IP or Unix printers (using the LPR port), and so on.
Page 139: Advanced Tab
PCL Printer Driver Setting (Windows) Advanced tab Performs settings regarding drivers, port time out and spooling. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window.
Page 140 PCL Printer Driver Setting (Windows) Hold mismatched documents Sets to hold the document which does not match to the printer setup. Print spooled documents first Sets to print the spooled document irrespective of a priority settings. Keep printed documents Sets to hold the spooled data of the documents after printing. Enable advanced printing features Enables the advanced printing features.
Page 141: Color Management Tab
PCL Printer Driver Setting (Windows) Color Management tab Performs settings related to color management. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. It is not used in this printing system.
Page 142: Security Tab
PCL Printer Driver Setting (Windows) Security tab Performs settings related to security. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. For more information, refer to the manual of the Windows. bizhub PRO 1200/1200P/1051 Printer 8-11...
Page 143: Configure Tab
PCL Printer Driver Setting (Windows) 8.10 Configure tab Performs settings of the printer options. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. Device Option The functions of this machine can be used from the printer driver if the in- stalled options, the User Authentication and Account Track functions are...
Page 144 PCL Printer Driver Setting (Windows) Note Be sure to select the options from the “Device Option”. Paper Type Settings Indicates the paper type specified for each tray. Click the [Paper Tray Settings] to specify the settings for each paper tray. Acquire Device Information Communicate with the copier to read the condition of the Driver Option and that of the Paper Tray.
Page 145: Settings Tab
PCL Printer Driver Setting (Windows) 8.11 Settings tab Performs settings of the printer. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Property window. EMF Spool Select this check box when meta file (EMF) spool is required for use in its own system environment.
Page 146 PCL Printer Driver Setting (Windows) Popup Authentication Dialog when printing Displays the User Authentication/Account Track dialog box when a print job is specified to enter a user name or a department name. Fix Secure Print Turn on the checkbox when the output method of Basic tab is fixed to the Secure Print.
Page 147: Basic Tab
PCL Printer Driver Setting (Windows) 8.12 Basic tab Performs basic settings of the printer. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window.
Page 148 PCL Printer Driver Setting (Windows) Document size that can be selected 5 1/2 x 8 1/2 SRA3 SRA4 ISO-B4 ISO-B5 Postcard 12 x 18W 11 x 17 W 8 1/2 x 11 W 5 1/2 x 8 1/2 W A3 W A4 W A5 W B4 W...
Page 149 PCL Printer Driver Setting (Windows) Paper - Paper Size You can select a paper size from the list shown by clicking [▼]. Document size that can be selected Same as Original Size Original Size x 2 12 x 18 11 x 17 9 x 11 8 1/2 x 14 8 x 13...
Page 150 PCL Printer Driver Setting (Windows) Document size that can be selected B5 W ISO-B4 W ISO-B5 W 8 1/2 x 11 Tab A4 Tab Custom Size Note The default is the Same as original size. The selection of “8K” and/or “16K” is available. However, they cannot be used.
Page 151 PCL Printer Driver Setting (Windows) Note The margin may be left or paper jam may be caused depending on the paper type or the environmental temperature or humidity. Zoom Print by specifying the enlargement or reduction ratio in the range from 25% to 400%.
Page 152 PCL Printer Driver Setting (Windows) Paper Type Types of paper that can be selected. No Setting Plain Paper Coated This is set when printing coated paper such as pamphlet. PrePrinted This is set when printing is made addition- ally on the paper that has been already printed.
Page 153 PCL Printer Driver Setting (Windows) Unit for Paper Weight Make a selection of the unit to be used as a sign of the Paper Weight. Units that can be selected are as shown below. - g/m , Duodecimo, A-Book, B-Book, Octavo, Bond, Book, Bristol, Cover, Index, Tag Update Paper Name The information of the paper Name that is registered with the copier is up-...
Page 154 PCL Printer Driver Setting (Windows) Output Method - Secure Print Used when highly confidential documents are printed. If you print with the Secure Print feature, the printing does not start until you input the Secure Print ID and the password on the copier's control panel. Open the file to be printed and select [File] - [Print] of application.
Page 155 PCL Printer Driver Setting (Windows) Select a box. Password Input screen appears. Enter [Password]. Press [OK] to close Password Input screen. Select the file to print and press Select [Auto], press [Print], and press the [OK]. Confidential file is printed. Detail To confirm the settings for Output, select [Wait] or [Proof], and press [OK].
Page 156 PCL Printer Driver Setting (Windows) Output Method - Save in User Box/Save in User Box/Print You can store the print job as image data on the copier's internal hard disk to re-output them when necessary. To output, operate on the control panel. Open the file to be printed and select [File] - [Print] of application.
Page 157 PCL Printer Driver Setting (Windows) Output Method - Wait Mode/Proof Print/Proof and Print (1st sheet) Outputs the test print and checks current setting from the control panel of copier. Use this when printing a large volume document, such as multiple sets of pages.
Page 158 PCL Printer Driver Setting (Windows) If necessary, select the item and change settings. Press the [OK]. The Mode Check screen will be restored. Press [START] to resume the rest of the print job. Output Method - Hold Print You can save a JOB in the copier temporarily and print it from the control panel as required.
Page 159 PCL Printer Driver Setting (Windows) User Settings A user setting is made for execution of [Secure Print]/[Save in User Box]. - Secure Print ID: Enter the Secure Print ID. - Password: Enter the Password. - File Name: Enter a file name when a file is saved in the box. - User Box Number: Enter a box number of a box into which a job is saved.
Page 160 PCL Printer Driver Setting (Windows) Detail Contact your administrator about User Authentication/Account Track. User Authentication Public User Select when you access as Public user to the image con- troller. Recipient User Select when you access as Recipient user to the image con- troller.
Page 161 PCL Printer Driver Setting (Windows) Offset Only when the finisher unit has been setup, select to shift the next position of each set of print out back and forth when printing multi set of copies. Click [Offset Settings] with a check put in [Offset] to display the [Offset Set- tings] window.
Page 162: Layout Tab
PCL Printer Driver Setting (Windows) 8.13 Layout tab Performs layout settings of the printer. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window.
Page 163 PCL Printer Driver Setting (Windows) Combination Prints multiple pages onto a single sheet of the paper. The page that has been allocated is reduced for “N in 1” and enraged for “N x N” against the document. 2 in 1 4 in 1 6 in 1 ABCD...
Page 164 PCL Printer Driver Setting (Windows) Imposition [2 in 1], [2 Repeat] or [2 Repeat Reversal] setting is available which prints out two page data on one sheet of paper. Two page data is printed out on a sheet of paper twice as large as the selected size of paper. Example: 2 A4 size papers are aggregated on 1 A3 size paper.
Page 165 PCL Printer Driver Setting (Windows) Chapter For the PCL printer driver, print a specific page so that it comes on the front, when printing on [2-Sided] or [Booklet]. Multiple page numbers can be entered. When entering multiple page num- bers, use commas to separate them as in the following example: [2,4,6]. A range can be specified with a hyphen as in the following example: [6-10].
Page 166 PCL Printer Driver Setting (Windows) Print Position Settings When [Print Position Settings] is selected, [Print Position Settings] dialog ap- pears. Print using the top of the paper. Center Print using the center of the paper. Bottom Print using the bottom of the paper. Print Type Selects the print type among 1-Sided, 2-Sided and Booklet.
Page 167 PCL Printer Driver Setting (Windows) Binding Margin Shifts the printing position according to the margin to be defined on the [Binding Margin Settings] dialog. Front Side Sets the margin for the front side. Back Side Sets the margin for the back side. Same value for front and Selects to use the same margin for the front and back sides.
Page 168 PCL Printer Driver Setting (Windows) Image Shift Settings When click this button, the [Image Shift Settings] dialog appears. Switch Settings It specifies whether the Image Shift sets up by the driver side or the printer side. Unit Select the units. Front Side Set the shift amount for the front side.
Page 169 PCL Printer Driver Setting (Windows) The shift of 10 to 15 mm (at intervals of 0.1 mm) is available only in the right direction. When setting the tray in which the Page Number and the Tab Paper are set in “Per Page Setting” on page 8-52, the relevant page is shifted to the right by the specified shift amount.
Page 170: Finish Tab
PCL Printer Driver Setting (Windows) 8.14 Finish tab Configures the special functions of the image controller. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window.
Page 171 PCL Printer Driver Setting (Windows) Staple Staple output paper. The number of staplings and their positions can be set. The selectable position will be changed according with the [Binding Position] setting. 1 Staple /Left Binding 1 Staple /Right Binding (Portrait) (Portrait) ABCD 2 Staples /Left Binding...
Page 172 PCL Printer Driver Setting (Windows) Center Staple and Fold Staples at the center of the output paper and folds it into half. The [Center Staple and Fold] cannot be set in the following cases: - When [Saddle Kit] is not available in [Configure] tab. Punch The output paper can be set to be punched with 2 holes, 3 holes, 4 holes or Multi Punch.
Page 173 PCL Printer Driver Setting (Windows) Fold Various ways of the folding can be setup. Z-fold Half Fold In Half Fold Out Letter Fold In Letter Fold Out Zigzag Fold In Zigzag Fold Out Double Parallel Fold In Double Parallel Fold Out Gate Fold In Gate Fold Out Multi-Letter Fold In...
Page 174 PCL Printer Driver Setting (Windows) The setting of [Fold] is available when the following unit is installed. Multi Folder Saddle Kit Z-Fold Half Fold (In/Out) Letter Fold (In/Out) Zigzag Fold (In/Out) Double Parallel Fold (In/Out) Gate Fold (In/Out) Multi-Letter Fold (In/Out) Multi-Half Fold Trim Cuts the edges of the output paper.
Page 175 PCL Printer Driver Setting (Windows) Output Tray Sets [Default], [Main Tray] or [Sub Tray] as [Output Tray]. Each of them can/cannot be set in the following cases: - [Sub Tray] need to be selected a Finisher on the [Configure] tab, respec- tively.
Page 176 PCL Printer Driver Setting (Windows) Perfect Binding The perfect binding function is a function with which the originals (the body of documents) the spine of which is pasted by the Perfect Binder (PB-502/ 503) is rolled-up in the cover sheet for binding. Perfect Binding cannot be set in the following cases: - When [PB-502/503] is not selected in [Configure] tab.
Page 177 PCL Printer Driver Setting (Windows) The Paper Size, the Paper Type and the Paper Weight that can be used for [Perfect Binding] are as shown in the table below. Size that can be used. Basic weight Paper type that can that can be be used.
Page 178 PCL Printer Driver Setting (Windows) Turn ON the [Perfect Binding] and then click [Perfect Binding Settings]. [Perfect Binding] can be set to the following modes. Turn on the [Cover Duplex] check box when printing the cover on both sides and the [Trim] check box when conducting the cover cutting operation. Cover Blank This is used when the perfect binding is employed with no printing made on the cover sheet.
Page 179 PCL Printer Driver Setting (Windows) Cover Print 1 in 1 This is used when arrangements are made in advance for the originals the front cover, the back cover and the spine of which have been cut and pasted to the same size as the paper used as the front cover. When printing the both sides of the front cover, it is necessary to make ar- rangements for the reverse side of the front cover in advance.
Page 180 PCL Printer Driver Setting (Windows) Cover Print 2 in 1 For the front cover, the first page and the last page (n page) of the originals are made as 2in1, and the second page up to the last page but one (n - 1 page) are printed as the body of documents with no printing made on the spine for perfect binding.
Page 181 PCL Printer Driver Setting (Windows) Cover Print 3 in 1 After cutting and pasting automatically the first page of the original on the front cover, the last page but one (n - 1 page) on the back cover, and the last page (n page) on 3in1 as the spine, the front cover is printed.
Page 182: Cover Mode Tab
PCL Printer Driver Setting (Windows) 8.15 Cover Mode tab You can select several cover settings such as a front and back covers and PI cover sheet. Also, the Chapter setting and Per Page Setting are available. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window"...
Page 183 PCL Printer Driver Setting (Windows) Front Cover Tray Specifies the paper tray for the front cover. Paper Type (Paper Name) Make a selection to decide if complying with the Default Setting or using the name registered in the information of the Paper Name. Back Cover Sets a back cover type.
Page 184 PCL Printer Driver Setting (Windows) When select the Per Page Setting from the list and click this button, the [Per Page Setting] dialog mentioned above appears. Per Page Setting - Edit List Name Changes the list name. When click this button, the [Edit List Name] dialog appears. Per Page Setting - Hole-Punch Settings Sets to use the punch function in the Per Page Settings.
Page 185 PCL Printer Driver Setting (Windows) Per Page Setting - Add When click this button, you can add Per Page Setting. Page Number Enters the page number (1 to 9999) which you want to set in the Per Page Settings. Multiple page numbers can be entered. When entering multiple page numbers, use commas to separate them as in this example: [2,4,6].
Page 186 PCL Printer Driver Setting (Windows) Tab Text Details When this button is clicked, the [Tab Text Details] dialog appears. You can configure the orientation, position, font name, font type, and font size. Tab Text Set the orientation and position of the tab text. Font Settings Set the font, font style and size of the tab text.
Page 187 PCL Printer Driver Setting (Windows) Per Page Setting - Tab Paper Settings By clicking the [Tab Paper Settings], the [Tab Paper Settings] window is dis- played. In the [Tab Paper Settings] window, header characters and other details can be set for the tab sheet. Paper List Tab The sorting of the Tab Paper that is set is specified.
Page 188 PCL Printer Driver Setting (Windows) Back Cover from Post Inserter Sets a back cover for which the paper is from the PI Tray 1, PI Tray 2 or PI- PFU Tray 1 - 3. And also, the continuous insertion of up to 20 sheets is available for each of the Font cover/Back cover.
Page 189: Stamp/Composition Tab
PCL Printer Driver Setting (Windows) 8.16 Stamp/Composition tab Performs settings related to definitions of Watermark. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window.
Page 190 PCL Printer Driver Setting (Windows) Watermark - Edit By clicking the [Edit], [Edit Watermark] window appears. When the [Add] is clicked, blank appears in the [Current Watermark]. Input the watermark name in the [Watermark Name] and the new watermark text in the [Watermark Text], new watermark text appears in the [Current Wa- termark].
Page 191 PCL Printer Driver Setting (Windows) Style You can select style from the list shown by clicking the [▼]. - When [Regular] is selected, normal formatting will be applied to your se- lected watermark text. - When [Bold] is selected, bold formatting will be applied to your selected watermark text.
Page 192 PCL Printer Driver Setting (Windows) Sharing The settings of the watermark are shared with other computers. Create Overlay File For creating overlays, perform the following procedure. Create an overlay with the application in use. Select [Print] from the [File] menu. The selected menu may differ depending on the application used.
Page 193 PCL Printer Driver Setting (Windows) Overlay Printing Procedure When printing overlays, perform the following procedure. Select [Print] from the [File] menu. The selected menu may differ depending on the application used. Select [KONICA MINOLTA1200/1051PCL]. Click [Preferences]. Click [Stamp/Composition] tab. Click [Print in Overlay] and select file to be printed from list. –...
Page 194 PCL Printer Driver Setting (Windows) Copy Protect Click [Edit] with the check box turned on when you want to make printing with the copy protect set to prevent an unauthorized copying. Characters: Select a feint character to prevent an unauthor- ized copying.
Page 195 PCL Printer Driver Setting (Windows) Page Number Click [Edit] to specify the pages to print the page numbers. All pages: Page number is printed in the all pages. Not Front Cover: Page number is printed except front cover. Not Front-Back Cover: Page number is printed except front/back cover.
Page 196 PCL Printer Driver Setting (Windows) Distribution Number Stamping - Starting Number Specifies the initial copy number to print. bizhub PRO 1200/1200P/1051 Printer 8-65...
Page 197: Quality Tab
PCL Printer Driver Setting (Windows) 8.17 Quality tab Performs settings related to Halftones, Brightness and Contrast. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window.
Page 198 PCL Printer Driver Setting (Windows) Smoothing Prints the curved section of characters and images smoothly, when this printing system is used. Smoothing - [Type 1] is suitable for printing the diagonal lines of normal characters and graphics. - [Type 2] is suitable for printing the curved sections of normal characters. - [Type 3] is suitable for printing the curved sections of ornamental writings and fine characters.
Page 199 PCL Printer Driver Setting (Windows) Detail The density is the same for [Density-2] when the setting is made to [Toner Save]. And also for [Density-4], the density is the same as when the set- ting is made to [Draft Print]. Item Print density 100%...
Page 200 PCL Printer Driver Setting (Windows) Print with Black - Text only Checking on the [Text only] allows you to print colored characters clearly in black. Print with Black - Text And Graphics Checking on the [Text and Graphics] allows you to print colored characters and lines, and graphics clearly in black.
Page 201 PCL Printer Driver Setting (Windows) Therefore, the same printing results as displayed on the screen can be obtained. When the printer fonts (those contained in the printer) are used, it is pos- sible to send only character codes to the printer for a high speed printing. On this occasion, printing may not always be made as displayed on the screen.
Page 202: Other Tab
PCL Printer Driver Setting (Windows) 8.18 Other tab Configures the other functions of the image controller. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 8-1 about how to open the Printing Preference window.
Page 203 PCL Printer Driver Setting (Windows) Note “Excel Job Control” and “Remove White Background” settings are not available for Windows XP Professional, Windows Vista and Windows Server 2003 (All 64bit editions). “Excel Job Control” can be changed only when the printer driver setting dialog is displayed in the “Printers”...
Page 204: Favorite Setting
PCL Printer Driver Setting (Windows) 8.19 Favorite Setting Settings with the printer driver can be saved to be restored as required. To Save Setting Current setting can be saved by the following method: Click [Add]. Enter a name to be saved and then set the [Icon] check box and the [Sharing] check box, if necessary.
Page 205 PCL Printer Driver Setting (Windows) Setting is saved and the name entered is displayed on the Favorite Set- ting list. To restore the setting in storage: Setting in storage can be restored when required. Click [Favorite Setting] menu. Select the setting to be restored from the list. To import the setting file Setting file can be imported by the following method: Click [Edit] of the Favorite Setting.
Page 206 PCL Printer Driver Setting (Windows) To delete the setting file Setting file can be deleted by the following method: Click [Edit] of the Favorite Setting. Select the file to delete from the list, click [Delete]. Click [Yes]. bizhub PRO 1200/1200P/1051 Printer 8-75...
Page 207: About View Area
PCL Printer Driver Setting (Windows) 8.20 About View Area Setting of the printer driver and status of the optional unit can be checked. To Check the Status of the Optional Unit Status of the optional unit can be checked by the image. Click [Printer View].
Page 208 PCL Printer Driver Setting (Windows) Image View The function set up is displayed on view area. The sample of images is shown in the following tables. Image View What is set Image Sample Paper view • Combination • 2-Sided • Secure Print •...
Page 209: Postscript Ppd Printer Driver Setting (Windows)
PostScript PPD Printer Driver setting (Windows) PostScript PPD Printer Driver setting (Windows) This chapter describes the settings of the PostScript PPD printer driver. For settings, use the Properties window. About Properties window This chapter explains the setting on the PPD printer driver with Properties window of Windows Vista.
Page 210: Properties Window
PostScript PPD Printer Driver setting (Windows) 9.1.1 Properties window You have two ways for selecting or changing settings through the printer driver. How to setup in the Properties window of the Printers window Settings made in the [Properties] of the [Printers] folder are applied to print outs from any application.
Page 211: About Button
PostScript PPD Printer Driver setting (Windows) About button Buttons common to each tab of the [Properties] window are shown below. Button Function When the [OK] is clicked, all tab settings are saved with the close of the properties window. Cancel When the [Cancel] is clicked, all tab settings are cancelled with the close of the properties window.
Page 212: Combination Of The Function
PostScript PPD Printer Driver setting (Windows) Combination of the function When you select a function which causes a confliction with the settings al- ready configured, the message will be displayed. This is a confirmation message to decide whether to restore the previous set- tings or keep the settings.
Page 213: General Tab
PostScript PPD Printer Driver setting (Windows) General tab Enables to print a test page. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window. Location Enters the name of a place where the printer is located.
Page 214 PostScript PPD Printer Driver setting (Windows) Note For more information, refer to the manual of the Windows. bizhub PRO 1200/1200P/1051 Printer...
Page 215: Sharing Tab
PostScript PPD Printer Driver setting (Windows) Sharing tab Performs share settings of a printer. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window. By using this [Sharing] tab, you can make the printer available to network us- ers.
Page 216: Ports Tab
PostScript PPD Printer Driver setting (Windows) Ports tab Performs settings related to ports. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window. Add Port Using this button enables you to add a new port for Vendor-specific port monitor, TCP/IP or Unix printers (using the LPR port), and so on.
Page 217 PostScript PPD Printer Driver setting (Windows) Note For more information, refer to the manual of the Windows. bizhub PRO 1200/1200P/1051 Printer...
Page 218: Advanced Tab
PostScript PPD Printer Driver setting (Windows) Advanced tab Performs settings regarding drivers, port time out and spooling. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window.
Page 219 PostScript PPD Printer Driver setting (Windows) Print directly to the printer Sets to print without spooling. Hold mismatched documents Sets to hold the document which does not match to the printer setup. Print spooled documents first Sets to print the spooled document irrespective of a priority settings. Keep printed documents Sets to hold the spooled data of the documents after printing.
Page 220: Color Management Tab
PostScript PPD Printer Driver setting (Windows) Color Management tab Performs settings related to color management. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window.
Page 221: Security Tab
PostScript PPD Printer Driver setting (Windows) Security tab Perform settings for the security. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window. Note For more information about Security tab, refer to the manual of the Win- dows.
Page 222: Device Settings Tab
PostScript PPD Printer Driver setting (Windows) 9.10 Device Settings tab Performs settings of PostScript and the options of the printer. Detail The method to open the Properties window depends on OS. Refer to "About Properties window" on Page 9-1 about how to open the Property window.
Page 223 PostScript PPD Printer Driver setting (Windows) Document size that can be selected 8 x 13 9 x 11 A3 W A4 Tab A4 W A5 W B4 (ISO) B4 W B4 W (ISO) B5 (ISO) B5 W B5 W (ISO) Japanese Postcard Legal Letter...
Page 224 PostScript PPD Printer Driver setting (Windows) Available PostScript Memory Displays the available PostScript memory. For more information, refer to the Adobe PS User’s Guide. Output Protocol Selects the output protocol. For more information, refer to the Adobe PS Us- er’s Guide. Send CTRL-D Before Each Job Selects to send a [Ctrl-D] signal to the printer to notify before the print job or not to send.
Page 225 PostScript PPD Printer Driver setting (Windows) Maximum Font Size to Download as Bitmap Specifies a maximum font size to download as bitmap. For more information, refer to the Adobe PS User’s Guide. bizhub PRO 1200/1200P/1051 Printer 9-17...
Page 226 PostScript PPD Printer Driver setting (Windows) Installable Option In this printing system, the following options are installable. Printer Memory 2GB / 1GB Stapler None / FS-521 Saddle-Stitcher None / SD-506 Stacker None / LS-505 / LS-505 (Two-Linked) Multi Folder None/ FD-503 (2/3 Hole Type) / FD-503 (2/4 Hole Type) Paper Source Unit None/PF-702 / PF-703 / PF-702+PF-703 /...
Page 227: Layout Tab
PostScript PPD Printer Driver setting (Windows) 9.11 Layout tab Performs settings of the layout. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 9-1 about how to open the Printing Preference window.
Page 228 PostScript PPD Printer Driver setting (Windows) Pages Per Sheet Allocates a document of 1 page, 2 pages, 4 pages, 6 pages, 9 pages or 16 pages onto a single page for printing. The allocated pages are automatically reduced for printing based on the printable area of the output paper. 2 in 1 4 in 1 6 in 1...
Page 229: Paper/Quality Tab
PostScript PPD Printer Driver setting (Windows) 9.12 Paper/Quality tab Performs settings of the paper and quality. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 9-1 about how to open the Printing Preference window.
Page 230 PostScript PPD Printer Driver setting (Windows) Media Selects the type of paper as the output paper as shown below. Types of paper that can be selected. No Setting Plain Paper Coated This is set when printing coated paper such as pamphlet. PrePrinted A selection is made when printing is made additionally on the paper that has been al-...
Page 231: Advanced Options Windows
PostScript PPD Printer Driver setting (Windows) 9.13 Advanced Options windows Performs advanced settings of the printer. Detail The method to open the Printing Preference window depends on OS. Re- fer to "About Properties window" on Page 9-1 about how to open the Printing Preference window.
Page 232 PostScript PPD Printer Driver setting (Windows) Document size that can be selected A3 W A4 Tab A4 W A5 W B4 (ISO) B4 W B4 W (ISO) B5 (ISO) B5 W B5 W (ISO) Japanese Postcard Legal Letter PostScript Custom Page Size SRA3 SRA4 Statement...
Page 233 PostScript PPD Printer Driver setting (Windows) Graphic - Scaling Prints by specifying the enlargement or reduction ratio in the range from 1% to 1000%. Graphic - True Type Font Selects to substitute with printer fonts for the True Type Font or to download as Soft font.
Page 234 PostScript PPD Printer Driver setting (Windows) 301-350g/m [245-300g/m ] or [301-350g/m ] cannot be set in the following cases: - When [Paper Source Unit] is not available in the [Device Setting] tab. Paper Color Selects the colors of the output paper as shown below: - No Setting - White - Clear...
Page 235 PostScript PPD Printer Driver setting (Windows) When a job the pile of which is not permitted is on the stacker, no pile is made even if a pile permission is granted. Binding Position Sets the binding position for the document to be printed. The position select- ed here will be the position of stapling, punching and base position of the im- age shift.
Page 236 PostScript PPD Printer Driver setting (Windows) Staple Staples output paper. The number of staplings and their positions can be set. The selectable position will be changed according with the [Binding Position] setting. 1 Staple /Left Binding 1 Staple /Right Binding (Portrait) (Portrait) ABCD...
Page 237 PostScript PPD Printer Driver setting (Windows) Punch The output paper can be set to be punched with 2 holes, 3 holes, 4 holes or Multi Punch. The position will be changed according with the [Binding Position] setting. 2 Holes / Left Binding 2 Holes / Right Binding (Portrait) (Portrait)
Page 238 PostScript PPD Printer Driver setting (Windows) Fold Various ways of the folding can be setup. Z-fold Center Staple and Fold Center Staple and Fold, Trim Half Fold In Half Fold Out Letter Fold In Letter Fold Out Zigzag Fold In Zigzag Fold Out Double Parallel Fold In Double Parallel Fold Out...
Page 239 PostScript PPD Printer Driver setting (Windows) The setting of [Fold] is available when the following unit is installed. Multi Folder Saddle-Stitcher Z-Fold Half Fold (In/Out) Letter Fold (In/Out) Zigzag Fold (In/Out) Double Parallel Fold (In/Out) Gate Fold (In/Out) Multi-Letter Fold (In/Out) Multi-Half Fold Image Shift Adjusts the details of the printing position to the output paper.
Page 240 PostScript PPD Printer Driver setting (Windows) Front Cover Sets a front cover type. When the [Blank] is selected, a blank sheet is inserted before the 1st page. When the [Print] is selected, the 1st page of the document is printed with the specified sheet as the front cover.
Page 241 PostScript PPD Printer Driver setting (Windows) Back Cover Tray Specifies the paper tray for the back cover. PI Front Cover Sets a front cover for which the paper is from the PI Tray 1, PI Tray 2 or PI- PFU Tray 1 - 3. The [PI Front Cover] cannot be set in the following cases: - When the [Multi Folder] or [Large PI] is not selected in the [Device Set- tings] tab - [Installable Options]...
Page 242 PostScript PPD Printer Driver setting (Windows) Perfect Binding Settings The perfect binding function is a function with which the originals (the body of documents) the spine of which is pasted by the Perfect Binder (PB-502/ 503) is rolled-up in the cover sheet for binding. Perfect Binding cannot be set in the following cases: - When [PB-502/503] is not selected in [Device Settings] tab.
Page 243 PostScript PPD Printer Driver setting (Windows) The Paper Size, the Paper Type and the Paper Weight that can be used for [Perfect Binding] are as shown in the table below. Size that can be used. Basic weight Paper type that can that can be be used.
Page 244 PostScript PPD Printer Driver setting (Windows) [Perfect Binding Settings] can be set to the following modes. Turn on the [Perfect Binding Cover Duplex] check box when printing the cov- er on both sides and the [Trim] check box when conducting the cover cutting operation.
Page 245 PostScript PPD Printer Driver setting (Windows) Cover Print 2 in 1 For the front cover, the first page and the last page (n page) of the originals are made as 2in1, and the second page up to the last page but one (n - 1 page) are printed as the body of documents with no printing made on the spine for perfect binding.
Page 246 PostScript PPD Printer Driver setting (Windows) Cover Print 3 in 1 After cutting and pasting automatically the first page of the original on the front cover, the last page but one (n - 1 page) on the back cover, and the last page (n page) on 3in1 as the spine, the front cover is printed.
Page 247 PostScript PPD Printer Driver setting (Windows) Wait Mode - Wait Mode/Proof and Print/Proof and Print (1st sheet) Outputs the test print and checks the current setting from the control panel of copier. Use this when printing a large volume document, such as multiple sets of pages.
Page 248 PostScript PPD Printer Driver setting (Windows) Confirm the current settings. – If you do not change any set- ting, proceed to the step 9. – Click [Suspended] to move the JOB to [Suspend] in the JOB list. – When [Proof and Print] is se- lected, only one set is printed and it stops.
Page 249 PostScript PPD Printer Driver setting (Windows) Wait Mode - Hold Print You can save a JOB in the copier temporarily and print it from the control panel as required. Use this function when you want to print more than one document in batch.
Page 250 PostScript PPD Printer Driver setting (Windows) Smoothing Prints the curved section of characters and images smoothly, when this printing system is used. Smoothing - [Type1] is suitable for printing the diagonal lines of normal characters and graphics. - [Type2] is suitable for printing the curved sections of normal characters. - [Type3] is suitable for printing the curved sections of ornamental writings and fine characters.
Page 251 PostScript PPD Printer Driver setting (Windows) Preset Stamp Select a feint character to prevent an unauthorized copying. Back Pattern Make a selection of the background pattern to prevent an unauthorized cop- ying. Print Density Selects the printing density. Item Print density Normal 100% Dark...
Page 252: Postscript Ppd Printer Driver Setting (Mac Os X)
PostScript PPD Printer Driver setting (Mac OS X) PostScript PPD Printer Driver setting (Mac OS X) This chapter describes the settings of the PostScript PPD printer driver using Mac OS X. 10.1 About Mac OS X window In Mac OS X, printer driver is set up using the [Printer Info] window, the [Page Setup] window and the [Print] window.
Page 253 PostScript PPD Printer Driver setting (Mac OS X) The method to open the [Printer Info] window (v10.3) Double-click [Applications] - [Utilities] - [Printer Setup Utility] in a hard disk with system. The [Printer List] window appears. Select the printer and then select [Show Info] from Printers menu. –...
Page 254 PostScript PPD Printer Driver setting (Mac OS X) The method to open the [Page Setup] window Open the file to print. Select [Page Setup] from File menu. – The [Page Setup] window appears. bizhub PRO 1200/1200P/1051 Printer 10-3...
Page 255 PostScript PPD Printer Driver setting (Mac OS X) The method to open the [Print] window Open the file to print Select [Print] from File menu. – The [Print] window appears. Detail To perform printing, click [Print]. Selecting [Save As] on the [Presets] pop-up menu enables you to save the settings you configured in the [Print] window.
Page 256: Page Attributes (Page Setup Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.2 Page Attributes (Page Setup window) Selects [Page Attributes] on the [Settings] pop-up menu in the [Page Setup] window. Detail Refer to the "The method to open the [Page Setup] window" on Page 10- Format for Selects the printer you want to use.
Page 257 PostScript PPD Printer Driver setting (Mac OS X) Document size that can be selected SRA4 12 x 18 11 x 17 9 x 11 8 1/2 x 14 8 1/2 x 11 5 1/2 x 8 1/2 8 x 13 8 1/2 x 13 8 1/4 x 13 8 1/8 x 13 1/4...
Page 258 PostScript PPD Printer Driver setting (Mac OS X) Note When selecting [Custom], you can set and register a paper size. A specific paper size cannot be selected due to other functions set. For details, refer to the explanation of each of the functions. The selection of “8K”...
Page 259: Custom Paper Size (Page Setup Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.3 Custom Paper Size (Page Setup window) Selects [Custom Paper Size] on the [Settings] pop-up menu (OS 10.3) or se- lect [Custom Size] on the [Paper Size] pop-up menu in the [Page Setup] win- dow(OS 10.4/10.5).
Page 260: Copies & Pages (Print Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.4 Copies & Pages (Print window) Selects [Copies & Pages] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-4. Copies Sets the number of copies to be printed.
Page 261: Layout (Print Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.5 Layout (Print window) Selects [Layout] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-4. Pages per Sheet Allocates a document of 2 pages, 4 pages, 6 pages, 9 pages or 16 pages onto a single page for printing.
Page 262 PostScript PPD Printer Driver setting (Mac OS X) Border Selects whether draw a frame or line as the border between pages. bizhub PRO 1200/1200P/1051 Printer 10-11...
Page 263: Paper Feed (Print Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.6 Paper Feed (Print window) Selects [Duplex] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-4. Paper Feed Selects the paper source. - All pages from: Prints all pages from the same tray.
Page 264: Setup (Print Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.7 Setup (Print window) Selects [Setup] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-4. Paper Type Sets various types of paper sizes as the output paper as shown below. Types of paper that can be selected.
Page 265 PostScript PPD Printer Driver setting (Mac OS X) Types of paper that can be selected. Fine This is set when printing fine paper such as memo paper. Book/News This is set when printing paper such as a book or newspaper. Embossed This is set when printing embossed paper such as tickets.
Page 266 PostScript PPD Printer Driver setting (Mac OS X) Front Cover Sets a front cover for which paper is different than the text paper. ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD Front Cover - Off...
Page 267 PostScript PPD Printer Driver setting (Mac OS X) PI Back Cover Sets a back cover for which paper is from the PI Tray 1, PI Tray 2 or PI-PFU Tray 1 - 3. The [PI Front Cover] or [PI Back Cover] cannot be set in the following cases: - When the [None] is selected for [Large PI] in the [Printer Info] window.
Page 268 PostScript PPD Printer Driver setting (Mac OS X) The Paper Size, the Paper Type and the Paper Weight that can be used for [Perfect Binding] are as shown in the table below. Size that can be used. Basic weight Paper type that can that can be be used.
Page 269 PostScript PPD Printer Driver setting (Mac OS X) [Perfect Binding Settings] can be set to the following modes. Turn on the [Perfect Binding Cover Duplex] check box when printing the cov- er on both sides and the [Trim] check box when conducting the cover cutting operation.
Page 270 PostScript PPD Printer Driver setting (Mac OS X) Cover Print 2 in 1 For the front cover, the first page and the last page (n page) of the originals are made as 2in1, and the second page up to the last page but one (n - 1 page) are printed as the body of documents with no printing made on the spine for perfect binding.
Page 271 PostScript PPD Printer Driver setting (Mac OS X) Cover Print 3 in 1 After cutting and pasting automatically the first page of the original on the front cover, the last page but one (n - 1 page) on the back cover, and the last page (n page) on 3in1 as the spine, the front cover is printed.
Page 272: Image/Layout (Print Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.8 Image/Layout (Print window) Selects [Image/Layout] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-4. Imposition Prints a document of 2 pages onto a single paper twice as big as the original documents.
Page 273 PostScript PPD Printer Driver setting (Mac OS X) Booklet Example: 2 A4 size papers are aggregated on 1 A3 size paper. 2 in 1 ABCD ABCD ABCD ABCD 2 Repeat ABCD ABCD ABCD ABCD ABCD ABCD 2 Repeat Reversal (L) ABCD ABCD ABCD...
Page 274 PostScript PPD Printer Driver setting (Mac OS X) Date/Time Specifies the pages to print the date and time. All pages: Date/Time is printed in all the pages. 1st Page Only: Date/Time is printed in the 1st page only. Resolution Specify the resolution of the printer (1200dpi / 600 dpi). Print Density Selects the printing density.
Page 275 PostScript PPD Printer Driver setting (Mac OS X) - [Type 2] is suitable for printing the curved sections of normal characters. - [Type 3] is suitable for printing the curved sections of ornamental writings and fine characters. - No [Smoothing] function is available when [Resolution] is set to [1200 dpi].
Page 276: Finishing (Print Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.9 Finishing (Print window) Selects [Finishing] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-4. Collate It is possible to print the required number of the first page, and then the re- quired number of the second pages, the third page, ..
Page 277 PostScript PPD Printer Driver setting (Mac OS X) Pile Permission When another printed document remains in Stacker, gives the permission to stack the output. Setting the Pile Permission to OFF allows no pile on the stacker. When a job the pile of which is not permitted is on the stacker, no pile is made even if a pile permission is granted.
Page 278 PostScript PPD Printer Driver setting (Mac OS X) Staple Staples output paper. The number of staplings and their positions can be set. 1 Staple /Left Binding 1 Staple /Right Binding (Portrait) (Portrait) ABCD 2 Staples /Right Binding 2 Staples /Left Binding (Portrait) (Portrait) ABCD...
Page 279 PostScript PPD Printer Driver setting (Mac OS X) Punch The output paper can be set to be punched in advance. 2 Holes / Left Binding 2 Holes / Right Binding (Portrait) (Portrait) ABCD ABCD 2 Holes / Left Binding 2 Holes / Right Binding (Landscape) (Landscape) ABCDEF...
Page 280 PostScript PPD Printer Driver setting (Mac OS X) Fold Various ways of the folding can be setup. Z-fold Center Staple and Fold Center Staple and Fold, Trim Half Fold In Half Fold Out Letter Fold In Letter Fold Out Zigzag Fold In Zigzag Fold Out Double Parallel Fold In Double Parallel Fold Out...
Page 281 PostScript PPD Printer Driver setting (Mac OS X) The setting of [Fold] is available when the following unit is installed. Multi Folder Saddle-Stitcher Z-Fold Half Fold (In/Out) Letter Fold (In/Out) Zigzag Fold (In/Out) Double Parallel Fold (In/Out) Gate Fold (In/Out) Multi-Letter Fold (In/Out) Multi-Half Fold Note...
Page 282: Security (Print Window)
PostScript PPD Printer Driver setting (Mac OS X) 10.10 Security (Print window) Selects [Security] on the pop-up menu in the [Print] window. Detail Refer to the "The method to open the [Print] window" on Page 10-4. Output Method - Off Sets the normal printing.
Page 283 PostScript PPD Printer Driver setting (Mac OS X) Output Method - Secure Print Used when highly confidential documents are printed. If you print with the Secure Print feature, the printing does not start until you input the Secure Print ID and the password on the copier's control panel. Open the file to be printed and select [File] - [Print] of application.
Page 284 PostScript PPD Printer Driver setting (Mac OS X) Select the file to print and press Select [Auto], press [Print], and press the [OK]. The Confidential file is printed. Detail To confirm the settings for Output, select [Wait] or [Proof], and press [OK].
Page 285 PostScript PPD Printer Driver setting (Mac OS X) Output Method - Save in User Box/Save in User Box and Print You can store the print job as image data on the copier's internal hard disk to re-output them when necessary. To output, operate on the control panel. Open the file to be printed and select [File] - [Print] of application.
Page 286 PostScript PPD Printer Driver setting (Mac OS X) Output Method - Wait Mode/Proof and Print/Proof and Print (1st sheet) Outputs the test print and checks the current setting from the control panel of copier. Use this when printing a large volume document, such as multiple sets of pages.
Page 287 PostScript PPD Printer Driver setting (Mac OS X) Press [START] to resume the rest of the print job. Output Method - Hold Print You can save a JOB in the copier temporarily and print it from the control panel as required. Use this function when you want to print more than one document in batch.
Page 288 PostScript PPD Printer Driver setting (Mac OS X) User Authentication/Account Track Sets the User Authentication mode/Account Track mode. Detail Contact your administrator about User Authentication/Account Track. User Authentication Selects to use the User Authentication mode. Public User Select when you access as Public user to the image con- troller.
Page 289: Troubleshooting
11.1 Basic Troubleshooting This section describes how to troubleshoot. If problems are not resolved by using the following procedure, contact your Konica Minolta service repre- sentative. First check the following ordinary causes of abnormalities: Check the power of the main body printer (copier), computers and ca- ble connections.
Page 290: General Problems Of Printing
Troubleshooting 11.2 General Problems of Printing The image controller does not respond to the Print command. Check that the printing system is selected as the current printer. – The printing system must be selected as the current printer on Win- dows before printing.
Page 291 – Contact your Konica Minolta service representative if you cannot print the test page after performing the above procedures. The print setting of a job does not correspond to the result of printing.
Page 292: General Problems Of Postscript
Troubleshooting 11.3 General Problems of PostScript A PostScript Error message displays. <Response> A search can be made from [http://www.adobe.com/cfusion/search/in- dex.cfm?CAT=support&TERM=&LOC=en%5Fus]. A PostScript Error message displays when attempting to get a printout from any computers are in use. <Response> There may be loose connections in the printing system. Recheck all of con- nections.
Page 293 Troubleshooting Non fixed size paper can not be printed correctly (Macintosh). <Response> The direction in which non fixed size paper is loaded in the copier may be incorrect. Rotate the paper direction 90 degrees and then try printing after changing the settings of the driver and copier accordingly.
Page 294: Checking On Incomplete Jobs
Troubleshooting 11.4 Checking on Incomplete Jobs If print jobs are not printed, you can check them on the Non complete Job List screen. To get the Non complete Job List screen to appear: Press [JOB LIST] on the LCD panel. Press [IncompleteHistory].
Page 295: Font
Font Font This chapter describes the font. 12.1 Font List (PCL) bizhub PRO 1200/1200P/1051 Printer 12-1...
Page 296: Font List (Postscript)
Font 12.2 Font List (PostScript) bizhub PRO 1200/1200P/1051 Printer 12-2...
Page 297: Screen Fonts
Font 12.3 Screen Fonts True type font other than the standard fonts of Windows is contained in the attached CD-ROM as the Screenfont. Installing the screen font into your system accomplishes the WYSIWYG en- vironment of the printer font and True type font. Resultingly the printing per- formance may be also improved.
Page 298 Font Turn on [Copy fonts to Fonts fold- er] check box. Click [Install]. – In case of Windows 2000/XP/ Server 2003, click [OK]. In case of Windows 7 Open “\ScreenFonts” folder on the “Driver CD”. Right -click the font to install, and select [Install]. Select [Start] - [Control Panel] - [Appearance and Personalization] - [Fonts].
Page 299 Font How to install PostScript Type1 Windows 2000/XP/Vista/7/Server 2003/Server 2008 supports PostScript Type 1 fonts at the system level just like TrueType fonts. You do not need to install ATM. In case of Windows 2000/XP/Vista/Server 2003/Server 2008 Select [Start] - [Control Panel]. –...
Page 300: Font Management Utility
Font 12.4 Font Management Utility You can use “Font Management Utility” to add the PCL font and the Post- Script font to the image controller or delete them from it. For details, refer to the User’s Guide contained in “PAGESCOPE UTILITIES CD-ROM [Font Management Utility]”.
Page 301: Utility Tool
Utility Tool Utility Tool This chapter describes how to use the Utility Tool. 13.1 PageScope Web Connection PageScope Web Connection can be used through the Browser application. Note This chapter describes the function which can be used by non-adminis- trator of the image controller. About the functions used by the adminis- bizhub PRO 1200/1200P/1051 Printer 13-1...
Page 302 Utility Tool trator, refer to the “User’s Guide (POD Administrator’s Reference or Main Body)” for more information about copier. When the [Enhanced Security] is ON, the PageScope Web Connection function cannot be used. When the [Enhanced Security] is turned from ON to OFF, the PageScope Web Connection function is kept at [OFF].
Page 303: 13.1.1 Outline Of The Pagescope Web Connection
Utility Tool 13.1.1 Outline of the PageScope Web Connection This section describes the outline of the PageScope Web Connection. The Administrator of the image controller can change the settings of the im- age controller with this tool. The general users can display the status of the image controller but cannot change the settings.
Page 304: 13.1.2 Start The Pagescope Web Connection
Utility Tool 13.1.2 Start the PageScope Web Connection How to start the PageScope Web Connection PageScope Web Connection can be used through the Browser application. Start the Browser application. Enter the IP address of the image controller in the [Address] and press the [Enter] / [Return] key.
Page 305 Utility Tool Display the variable status Device Information - Configuration Summary Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Configuration Summary] from the sub navigation. The [Configuration Summary] page appears.
Page 306 Utility Tool Device Information - Option Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Option] from the sub navigation. The [Option] page appears. bizhub PRO 1200/1200P/1051 Printer 13-6...
Page 307 Utility Tool Device Information - Consumables Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Consumables] from the sub navigation. The [Consumables] page appears. bizhub PRO 1200/1200P/1051 Printer 13-7...
Page 308 Utility Tool Device Information - Meter Count Click [Information] from the top navigation. The [Information] page appears. Click [Device Information] from the left navigation. The [Device Information] page appears. Click [Meter Count] from the sub navigation. The [Meter Count] page appears. bizhub PRO 1200/1200P/1051 Printer 13-8...
Page 309 Utility Tool Device Information - Online Assistance Click [Information] from the top navigation. The [Information] page appears. Click [Online Assistance] from the left navigation. The [Online Assistance] page appears. bizhub PRO 1200/1200P/1051 Printer 13-9...
Page 310 Utility Tool Device Information - Network Setting Information Click [Information] from the top navigation. The [Information] page appears. Click [Network Setting Information] from the left navigation. The [Network Setting Information] page appears. bizhub PRO 1200/1200P/1051 Printer 13-10...
Page 311 Utility Tool Print Setting Information - Default Setting Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Default Setting] from the sub navigation. The [Default Setting] page appears. bizhub PRO 1200/1200P/1051 Printer 13-11...
Page 312 Utility Tool Print Setting Information - Font Information Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Font Information] from the sub navigation. The [Font Information] page appears. bizhub PRO 1200/1200P/1051 Printer 13-12...
Page 313 Utility Tool Print Setting Information - Macro List Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [Macro List] from the sub navigation. The [Macro List] page appears. bizhub PRO 1200/1200P/1051 Printer 13-13...
Page 314 Utility Tool Print Setting Information - PCL Setting Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [PCL Setting] from the sub navigation. The [PCL Setting] page appears. bizhub PRO 1200/1200P/1051 Printer 13-14...
Page 315 Utility Tool Print Setting Information - PS Setting Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [PS Setting] from the sub navigation. The [PS Setting] page appears. bizhub PRO 1200/1200P/1051 Printer 13-15...
Page 316 Utility Tool Print Setting Information - TIFF Setting Click [Information] from the top navigation. The [Information] page appears. Click [Print Setting Information] from the left navigation. The [Print Setting Information] page appears. Click [TIFF Setting] from the sub navigation. The [TIFF Setting] page appears. bizhub PRO 1200/1200P/1051 Printer 13-16...
Page 317 Utility Tool Current Jobs Click [Job] from the top navigation. The [Job] page appears. Click [Current Jobs] from the left navigation. The [Current Jobs] page appears. After selecting [Print] or [Scanner Transmission] from the pull-down menu provided at the upper left of the list, click [Go] to change the con- tents of the list.
Page 318 Utility Tool Job History Click [Job] from the top navigation. The [Job] page appears. Click [Job History] from the left navigation. The [Job History] page appears. After selecting [Print] or [Scanner Transmission] from the pull-down menu provided at the upper left of the list, click [Go] to change the con- tents of the list.
Page 319: 13.1.3 Print The Report
Utility Tool 13.1.3 Print the Report How to print the report Click [Information] from the top navigation. The [Information] page appears. Click [Print Information] from the left navigation. The [Print Information] page appears. Select the report type to be printed. Click [Print].
Page 320: 13.1.4 Make A Direct Print
Utility Tool 13.1.4 Make a Direct Print How to Make a Direct Print Click [Direct Print] from the top navigation. The [Direct Print] page appears. Click [Browse], select file to be printed and click [OK]. The [Direct Print] page will be restored. Click [Print].
Page 321: Netware
Utility Tool 13.2 NetWare This printing system works with IPX/SPX (Internetwork Packet Exchange / Sequenced Packet Exchange). This section explains how to configure a NetWare File Server, a NetWare Print Server, and a NetWare queue. The image controller supports the system environment described below. Version Protocol Emulation...
Page 322 Utility Tool Note Define the primary file sever if the network connects to many sites and has more than one file server. PCONSOLE should be used to set up the primary file sever. Setup for NetWare 4.x-6 Novell NetWare 4.x-6 can operate in two modes, NetWare Directory Service (NDS) and Bindery Emulation Service (Bindery Emulation).
Page 323 Utility Tool Pre-4.x-6 NetWare versions provide the same data found in the DIB but the data is stored in the NetWare Bindery. The DIB was designed with more flex- ible access, more specific security, and, since it is distributed, was designed to be partitioned.
Page 324 Utility Tool Detail Refer to the Novell NetWare manual for details of setup with PCONSOLE of NDS. Setup for Bindery Emulation Make sure of the Bindery Context. Before connecting the print server (network interface card) to the Novell Net- Ware 4.x-6 server of Bindery mode, make sure that the NetWare server con- tains the bindery context.
Page 325: Unix Printing Through Tcp/Ip
Utility Tool 13.3 UNIX Printing through TCP/IP This section explains how to configure the network interface card and your network for use with TCP/IP communication in various UNIX environments. Independent setup and installation procedures are provided for most popu- lar UNIX systems. The TCP/IP capability of the network interface card will also operate with lpr spoolers on other systems, and with spooler/supervisor capabilities that communicate raw print jobs to the TCP/IP port of the network interface card.
Page 326 Utility Tool Note The network interface card will also operate with other host-resident print supervisor/spooler programs that present a print image to the image con- troller over a TCP/IP port. Printing overview Considering both the host-based and printer-based TCP/IP printing capabil- ities, the network interface card works with the following systems: - All UNIX systems that support lpd - System V Rel.
Page 327 Utility Tool Note You can use the BOOTP, rarp, or arp and ping procedures only when the network interface card is in its default state (when no IP information has been entered). Depending on the topology, you may need to provide the MAC address of the network interface card.
Page 328 Utility Tool Open the /etc/printcap file. – Make an entry naming the network interface card as the remote host and PRINT as the remote printer name. A typical printcap entry is as follows: – <printer_name>\ (for example, lprprinter) :lp=:\ :rm=<remote_host>:\ (for example, name as entered in /etc/hosts) :rp=PRINT :sd=/usr/spool/lpd/<printer_name>: (for example, spool directory on system used to spool data and...
Page 329 Utility Tool After you have supplied all values, press Enter. You can now print. Data Requested Example Data Description Name of queue to ad print1 Name of local printer queue Destination Host printfast NIC IP hostname Short Form Filter /usr/lpd/bsdshort Required value Long Form Filter /usr/lpd/bsdlong...
Page 330 Utility Tool Setting Up an HP-UX Remote Printer to Use lpd Set up a remote printer on the host that sends jobs to the network interface card using the lpd of the network interface card. To do this: At the prompt, type: –...
Page 331 Utility Tool Setting Up an AS/400 System to Use lpd When working with the output queue description (WORKOUTQD), there are several fields that must be defined for the network interface card to function properly as a remote printer device. Use the following procedure to define fields for the network interface card to make it function as a remote printer: When prompted for the remote system, type INTNETADR so the AS/ 400 recognizes the device as an IP device...
Page 332 Utility Tool Setting Up a SCO UNIX Remote Printer to Use lpd Use the following procedure to set up a remote printer on the host that sends jobs to the network interface card using lpd. At the prompt, enter the mkdev rlp command. –...
Page 333 Setting Up System V Release 4 and Solaris 2.X to Use lpd If your system recognizes the LPSYSTEM command, you do not need to in- stall the dedicated utility, Konica Minolta's host-side software. Another op- tion is the admintool if your system supports it.
Page 334: Tonecurve Utility
Utility Tool 13.4 ToneCurve Utility Using the ToneCurve Utility allows you to adjust the brightness and the con- trast of the document to be printed. The tone curve that has been registered can also be used by other computers on the network. Note The tone curve that has been created by the ToneCurve Utility and regis- tered with the image controller can be selected only by the PPD Plug-in...
Page 335 Utility Tool The flowchart for the operation of ToneCurve Utility is as described below. Start of the ToneCurve Utility. Selection of a printer. When a test chart is When any test chart used that has been is arbitrarily used: registered: Click [Add] to select a file (restricted only to PS and Select a registered test chart...
Page 336 Utility Tool Main window of the ToneCurve Utility - Click [Add] and select a file to add a test chart. - To adjust the tone curve, slide the slider of [Brightness]/[Contrast] or drug and drop the mouse at the adjustment point in the tone curve area. - Click [Save] to save the settings of the tone curve.
Page 337 Utility Tool - Clicking [Default Setting] allows you to specify the tone curve and the screen to be used for default. This allows you to simplify the settings in the PPD Plug-in driver. - Since putting a check on [Use CIE Color] causes a color conversion proc- ess to be conducted through the XYZ color space, the level of gradient can be raised, in which case, however, a longer time may be required for output.
Page 338: Appendix
Appendix Appendix 14.1 Setting the Software Switch When there occurs any problem listed in the table below, such a trouble may be eliminated by switching [Software Switch]. The setting of [Software Switch] can be made by pressing the buttons: [MA- CHINE] - [Controller] - [08 Administrator Setting] - [01 Software Switch Set- ting] in this order on the control panel of the copier.
Page 339 Appendix Memory Switch Trouble Effect of the switch No. to be (when turned On (1)) checked When the color image is output The reproducibility in the halftone through the PostScript driver, an section of the color image is im- output is made with some of the proved.
Page 340 Appendix Memory Switch Trouble Effect of the switch No. to be (when turned On (1)) checked When a cover insertion setting is When a cover insertion setting is made for Mac OS 10.5 or later ver- made, the number of copies can be sion and an output is made with a output as specified.
Page 341: Procedure For Installation With Linux
Appendix 14.2 Procedure for installation with Linux Operation checking environments (as of April, 2009) The following operating environments are being checked. Operating systems Red Hat Linux 9.0, SuSE Linux 8.2 CUPS Version 1.1.22 or 1.2.0 Connecting the computer and USB connection, Parallel connection, Network con- printer nection (AppSocket/HP JetDirect, IPP, LPD/LPR) More than OS recommendation (128 MB or more is...
Page 342 Appendix – For example: Enter “/etc/init.d/cups restart”. – The following command may be available depending on the meth- od by which the installation is made. – /etc/re.d/init.d/cups restart – /sbin/init.d/cups restart – “killall-HUP cupsd” Adding the Printer 0 After copying the PPD file, be sure to restart CUPS. Start up the Web browser.
Page 343 Using printer Hostname - socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. – In case of USB Printing Select USB Printer #1 (KONICA MINOLTA bizhub PRO 1200/ 1200P/1051). If it is not displayed, restart the machine. –...
Page 344 Driver Installation dialog box appears. Enter /usr/share/cups/model/ in the driver directory and then click [Browse]. Click [Select] from Select path windows. In the Selection of drivers list, select “KONICA MINOLTA 1200 OpenOffice PPD”. Click [OK]. Select “KONICA MINOLTA 1200 OpenOffice PPD” (KO1200opn.ppd), and then click [Next].
Page 345 Appendix In the command line, enter “lpr -P” followed by the name of the printer added first, then click Next. Change the printer name. Click [Finish]. The Printer Administration dialog box appears again. Click [Close]. From the main menu, select [Office], then [OpenOffice.org Writer]. Click [Print] in the File menu.
Page 346 Appendix Checking Print Jobs You can check the status of print jobs from a Web browser. Start up the Web browser. Enter the URL “http://local- host:631”. The CUPS Administration Web page appears. Click [Manage Jobs]. A list of the currently active print jobs appear.
Page 347: Glossary
Appendix 14.3 Glossary Item Description 10BASE-T/100BASE-TX/ Types of specifications in compliance with the Ether- 1000BASE-T net standard. Cables made of two stranded copper wire rods are used. Communication speed is 10Mbps with 10Base-T, 100Mbps with 100Base-TX, and 1000Mbps with 1000Base-T. AppleTalk General term of protocols to perform the network functions developed by Apple.
Page 348 Appendix Item Description DHCP Abbreviation of Dynamic Host Configuration Proto- col. A protocol for a client machine on the TCP/IP net- work to automatically read the setting for the net- work from a server. Only by controlling the IP addresses for the DHCP clients collectively with the DHCP server, a network can be easily constructed avoiding duplicate ad- dresses.
Page 349 Appendix Item Description Gray scale Monochromatic image expression method making use of the gradation information from black to white. GSS-SPNEGO/Simple/Digest Authentication forms used at the log on to an LDAP server. Authentication forms of LDAP servers vary depending on servers to be used and server setup so that the GSS-SPENEGO, Simple, or Direct MD5 au- thentication forms is appropriately used.
Page 350 Appendix Item Description MAC Address Abbreviation of Media Access Control Address. An ID number peculiar to each Ethernet card based on which data is transmitted or received between cards. Expressed by 48-bit figures; former 24 bits represent a number peculiar to each maker controlled and al- located by IEEE and the latter 24 bits is a number al- located uniformly to the cards by the maker.
Page 351 Appendix Item Description Port number Number to distinguish each communication port of multiple processes working in the computers on the network. A same port cannot be used for multiple processes. PostScript Representative page description language generally used for printing requiring specifically high quality, developed by US Adobe.
Page 352 Appendix Item Description Abbreviation of Red, Green, and Blue. Primary colors used for color expression of monitor, etc. All colors are produced by changing the bright- ness ratio of the RGB colors. Scan In the scanner reading operation, image is read by moving the image sensors forming in line.
Page 353 Appendix Item Description Uninstall To delete installed software. Abbreviation of Universal Serial Bus. General-use interface standard for connecting a computer and a mouse, printer, etc. Web browser Software to access web pages. Internet Explorer, Netscape Navigator, etc. are examples. bizhub PRO 1200/1200P/1051 Printer 14-16...
Page 354: Index
Appendix 14.4 Index Page Number ......... 8-64 Pages Per Sheet ......9-20 Paper Color ....8-21 9-26 10-14 Back Cover ....8-52 9-32 10-15 Paper Feed ........10-12 Binding Position ....8-35 10-26 Paper Size ......9-23 10-5 Paper Type ........10-13 Per Page Setting ......
Page 355 A0G69551-PK-13 2010. 1 2010...

This manual is also suitable for:

Bizhub pro 1200/1200pBizhub pro 1051Bizhub pro 1200 Bizhub pro 1200p

Konica Minolta bizhub PRO 1051 User Manual

1 Introduction

2 Overview

3 Installation of the Printer Driver (Windows) (Easy Installation Using the Installer)

4 Installation of the Printer Driver (Windows) (Manual Installation Using the Add Printer Wizard)

5 Installation of the Printer Driver (Macintosh)

6 Uninstallation of the Printer Driver

7 Basic Printing and Various Function

8 PCL Printer Driver Setting (Windows)

9 Postscript PPD Printer Driver Setting (Windows)

10 Postscript PPD Printer Driver Setting (Mac os X)

11 Troubleshooting

12 Font

13 Utility Tool

14 Appendix

Quick Links

Related Manuals for Konica Minolta bizhub PRO 1051

Summary of Contents for Konica Minolta bizhub PRO 1051

This manual is also suitable for:

Table of Contents