Konica Minolta BIZHUB PRO 1050 Operator's Manual page 378

13
Procedure
1
Touch [Adjustment] - [01 Machine Adjustment] - [01 Magnification Ad-
justment].
2
Touch [02 Printer Drum Clock Adjustment <SIDE2>] to display the
Printer Drum Clock Adjustment <SIDE2> Screen.
3
Select the required paper size using [Next] or [Back]. With [Next] select-
ed each time, the display will switch as follows:
Tray1 – Tray2 – PFU upper tray – PFU middle tray – PFU lower tray
4
Touch the [COPY] tab.
5
Load A3 paper into the tray, then press [Start] to output the sample pat-
tern (No. 16).
6
Measure the resultant magnification to the direction of paper feed.
7
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab
to return to the Adjustment Screen.
8
Use the touch panel keypad to enter an appropriate value, then touch
[Set].
Available range: -10 (short) to 0 (long), 1 step = 0.05 %.
9
Repeat steps 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Magnification Adjustment Menu Screen.
13-8
Paper feed
direction
205.7
Adjustment
bizhub PRO 1050