Using Power Save Manually - Konica Minolta BIZHUB PRO 1050 Operator's Manual

2
2.3.3

Using Power Save Manually

Follow the procedure below to operate Power Save function (Low Power or
Shut-Off) manually.
Note
The machine is initially set to activate the Shut-Off function manually. For
details, refer to "Lists of the function settings" on page 15-5.
1
Press [Power Save] for one second or longer, then release it.
The following message will be displayed.
- Using Auto Shut-Off:
- Using Auto Low Power:
2-22
Entry Shut off mode, after 10 second
Press key/screen to cancel
Entry LowPower mode, after 10 second
Press key/screen to cancel
Preparation for Use
bizhub PRO 1050