Copy Setting; Reset Setting - Konica Minolta BIZHUB PRO 1050 Operator's Manual

Hide thumbs Also See for BIZHUB PRO 1050:

Table of Contents

03 Copy Setting

Set the copying condition as desired when the machine is reset. Also select

whether to reset the machine or not when inserting a key counter or a copy

card under the following reset conditions.

Resetting the machine:

- when the power is turned off

- when Auto Reset is on

- when Power Save is on

- when copying becomes available by entering the password when User

Authentication/Section Authentication is on

- when a key counter or a copy card is inserted

- when pressing [Reset] on the control panel

01 Initial Setting

Besides the factory default setting (Full Auto), you may set the copying con-

dition as the initial setting as desired.

Full Auto copying condition:

- Original Setting: standard

- Special Image: standard

- Auto Zoom: On

- Zoom: 1.000

- Output Application: See "02 Reset Function Setting"

- Copy Mode: 1-1

- Auto Paper Select: On

- Rotation: On

User Setting

bizhub PRO 1050