Konica Minolta BIZHUB PRO 1050 Operator's Manual page 240

8
8
Position original.
For Auto Detect mode original, open the document feeder, then posi-
tion the original FACE DOWN on the original glass.
For 2 Repeat, 4 Repeat or 8 Repeat mode original, ADF is also availa-
ble.
Reminder
When Auto Detect mode is selected, No Image Area Erase functions au-
tomatically.
DO NOT close the document feeder.
9
Press [Start].
!
Details
The Auto Detect mode may not operate properly if the lighting in the work
place is directly over the original glass. In this case, consult your service
representative about an appropriate place for installation.
8-52
Applications
bizhub PRO 1050